I get mine for my AZ swift sport from RHD Japan. 3 track days and no fade etc. no squealing. A bit of dust. Endless CCrG. If you’re not tracking it then get Endless MX72+ Or Project Mu HC+ Locally you may be able to get EBC yellow stuff.
Just bought Pagid discs and pads for my Suzuki Swift. mix of main and rural roads in NW England, plenty of wet, mud and hills.
I switched to the Ferodo DSUno. I am satisfied with its performance, but they seem to struggle because of something. Today, after the track day on Saturday, I checked it and found a crack and a gnawed edge. Also, they have uneven wear, about 0.5-1mm difference. The differences are between the top and bottom parts of the pads, front and back parts and on different sides of the same rotor (inner and outer pads). Uneven wear was with the old pads as well. Recently, I installed brake air ducts, and after going out from the track, the temperature was, in the worst case, 480C degree, which looks fine for these pads. In total, I drove for about 3 hours on tracks, one on a wet track (so no hard braking) and two moderately/hard(8-9/10) braking. The brake rotors are also new, Zimmermann blank, installed with pads. The initial thickness of the pads is 16.4mm (with the plate, the plate is 5.5mm, so the "pure" pad is about 11mm) Currently, I have eaten about 4.5-5mm of the pads in 3 hours of tracking.
I had a track day today with 1 hour session and closer to the end they were fade.When I took the pads out to check I noticed that they are extremely glazed like covered with a melted metal.Also, looks like they covered rotors with this melted metal, the inner side of both of them.The outer rotors surface is fine. The outer pads look the same glazed.I was checking them yesterday last time and they looked fine.The friction material looked fine and not that glazed.It's on the last photo.I was trying to brake short and strong all the time.There car is Suzuki swift sport.Brake pads ferodo dsuno.Track Zolder.
Took the Swift for a spirited drive down the horseshoe pass today, by the bottom the brakes stank, pedal went soft and stopping power became dangerously weak. Drove it softly for a mile or so and they were back to normal and I could lock the wheels again.
Write your review about brake pads
Help others - share your experience with this part.
Voted AGAINST engine oil RAVENOL on the rating page
The brake pads OEM Alfa Romeo got the first review!
The brake caliper OEM BMW got the first review!
The brake pads OEM Infiniti got the first review!
For wiper blades PIAA already 100 reviews.
For battery Energizer already 25 reviews.
In the rating best water pump already 12 brands participate!
In the rating best timing belt already 13 brands participate!
In the rating best head gasket already 3 brands participate!
In the auto rating oil filter for Volkswagen Passat already 5 brands participate!
In the auto rating brake pads for Mazda 5 already 10 brands participate!
In the auto rating tires for Subaru Outback already 50 brands participate!
For cabin filter Fram already 25 reviews.
Voted AGAINST engine oil RED LINE on the rating page
Voted AGAINST engine oil PENNZOIL on the rating page
This part for Suzuki Swift is made around the world. We have reviews for brake pads manufacturers from countries such as: Germany, Japan, UK .
In March 2026, the ranking of brake pads for Suzuki Swift on PartReview included 4 manufacturers. It is based on 5 reviews and 16 votes.
Last month, PartReview users preferred Hella Pagid. 18% of positive votes went to this manufacturer.
In second place: brake pads ENDLESS — 18%.
Third place: Ferodo with 0% of the votes.
In the overall ranking of brake pads, which aggregates opinions of owners of different car makes and models, these brands hold the following positions:
After seeing which brake pads owners of Suzuki Swift prefer, check other popular parts for this car. In March 2026, leaders on PartReview were:
