My experience with hundreds of thousands of miles on many different Toyota/Lexus SUV’s is to go with OEM. You shouldn’t have to do anything with the calipers unless one is frozen. You’ll know that for sure when you try to collapse them to put in the new brake pads. Otherwise just new rotors, pads and all hardware (pins, shims, etc)
I did the tundra upgrade 10 years ago, and I'm STILL on the same rotors!!!
I replaced mine around 55k miles. You’ll be so much happier starting fresh, no shuddering, better braking power.
I’ve bought at least 6 cars for family/friends using Cinch and have found them to go above any other standard I’ve come across in 40 yrs in the motor trade. A few yrs back bought my mum a 3 yr old Aygo with 9,000 miles on the clock and it was delivered with new front discs and pads fitted. I queried this with the delivery driver as I wouldn’t have expected them to need replacing at such low mileage. His reply was “yeh, If there’s Any sign of rust on any brake disc then we’ve been told to replace whatever is needed”
Galfer Wave Rotors and MTX Braking Red Pads. Upgraded my Switchblade to 203mm front and rear and added in a set of Red Pads and my SRAM Code R now stop like XTR but have great modulation.
Larger (200mm+) Galfer rotors + MTX pads. This combo is damn near bullet proof.
I usually just use the built in threaded rotor removal bolt holes on Toyota rotors, they usually work very well... Much better than beating the shit out of the rotor with a sledge hammer, all that does is hammer the wheel bearings to death unnecessarily.
I will say this that I have noticed a measured difference in my vehicle's ability to stop and in the Brake bite is more pronounced
Just an FYI. I just did the brakes and rotors on my LS430. Brake pads are the easiest job ever did. it's just a pin and a clip. Rotors require removing 4 bolts and replacing them as they are drop bolts. Still easiest brake job I have done on a car and I did for around I think 400 with OEM parts
Many heavy 4WD vehicles out there chew through rotors in 25k miles. My LandCruiser goes through them every 20k. And yes, I have checked the thickness and I've tried resurfacing old rotors a couple times but it always resulted in short life and problems.
Write your review
Help others - share your experience with this part.
Brake discs Zimmermann or POWER STOP
Brake discs Brembo or Zimmermann
Brake discs Brembo or POWER STOP
Brake discs Zimmermann or Centric
Brake discs Zimmermann or STOPTECH
Brake discs Zimmermann or OEM Volkswagen
Brake discs Zimmermann or EBC
Brake discs Zimmermann or Raybestos
Show allVoted AGAINST engine oil RAVENOL on the rating page
The power steering pump OEM Volvo got the first review!
The brake pads OEM Infiniti got the first review!
The brake cylinder Raybestos got the first review!
For tires OEM Toyota already 25 reviews.
For tires IRONMAN already 25 reviews.
In the rating best fuel pump already 5 brands participate!
In the rating best antifreeze already 9 brands participate!
In the rating best engine radiator already 9 brands participate!
In the auto rating shock absorbers for Ford Ranger already 20 brands participate!
In the auto rating brake discs for Volkswagen Golf already 10 brands participate!
In the auto rating headlights for Volkswagen Golf already 5 brands participate!
For wiper blades PIAA already 100 reviews.
Voted AGAINST engine oil RED LINE on the rating page
Voted AGAINST engine oil PENNZOIL on the rating page
