Brake pads Carbotech or GALFER
For Shimano Ultegra/Dura Ace
I had the same problem with my c8 z51, I switched to the Carbotech 1521 pads and they solved the problem. Would definitely recommend
I threw a set of Galfer pads in mine and have been happy.
I had an issue with severe brake dust from the OEM pads on my Z06 Corvette. I replaced the pads with Carbotech 1521s and the dust was eliminated. Made a huge difference with keeping the wheels clean and the pads preformed better.
I run HH Sintered Galfer pads which make a big difference off road.
Carbotech has served me very well on my M6
I run carbotech 12/10 on my C5. Streetable but messy. I only really drive to track, on track, then home. Probably drive 100 street/leisure miles a year, but after 2 track days on this setup (wilwood aero6 in front) I’m very happy with the setup.
I'm liking the Carbotech 1521 pads for their better heat tolerance and modulation over OEM pads, though I feel light initial bite is slightly less.
im running XP10s... so far this set up is amazing, the braking is strong initial bite with little fade. Just take in consideration that this Carbotech pads are modular which means you will have a slight longer pedal travel than normal. And yes they are super noisy, when i drive it on the street i try to be careful with my braking and not feather the brakes, that will make then literally screech and grind the rotors, instead i try to brake a bit harder than usual to get a good bite and then let go of the brake once i stoped (put the car in neutral most of the time or creep forward little by little to releave some heat).
Go with the Galfer synthetic and that too will be burnt under 4k km, I have changed twice already in 10k.
Write your review
Help others - share your experience with this part.