Brake pads Raybestos or OEM Mazda
Fitted my 2017 with new front/rear brakes and rotors yesterday. I went with the daily driver level Raybestos brand kit from Rockauto. Included both pads and rotors with hardware. Did the work myself. While I obviously can't say anything about longevity yet, performance seems good so far. Especially for the price when compared to over double for Duralast from my local AutoZone.
I've had great results from Raybestos ST43s and Ferodo DS2500s for dual duty.
I'm using raybestos SP436ATRH for the pads and raybestos 96632FZN for the rotors. Been using them since January and have put about 6k on them, living in a really hilly area with my drums being basically useless because the shoes have been coated in gear oil due to an axle leak. I javent had any issues with brake fade or warping and I took them on a 2hr trip to west virginia from central ohio in March.
I replaced my rear pads with Raybestos EHT1761 at 23,000 miles. I did not replace the rotors as they were undamaged. I did buy rear rotors, Powerstop EBR1697EVC. I am at 37,000 now with no dust, no noise, and minimal pad wear.
On rockauto, Raybestos sells the element 3 rotor and brake and rotor kit. Basically all I use for my brake changes now. Great stopping power, and pads last a good while also. Highly recomend Raybestos element 3.
For aftermarket pads, Raybestos have had very good fitment and quality, I dig it. Their product line is called like "el3ment" or some such.
I would go with the Raybestos Element 3 kit sold here. $180 total roughly front and back. 2 seperate kits, one for front, one for back. You will find this under the fully coated section here as they have different grades of pads. For the price and how long these last, you cannot beat it. And better than the top quality parts local parts stores carry, in fact Napa sells these rebranded as their premium top of the line brakes and rotors. For the price, and the quality, is by far your best option. There are better pads that will last a little longer, but are much more pricey. With the miles you drive, these will last 5-10 years. I use these on all vehicles in the rust belt, as these are rust coated.
i remember hearing a guy complain about his cx5 eating through brakes, but the cx5 is the same car as my mazda3, and my mazda3 has seen 70,000km for its rear brake pad/ 90,000km for the fronts, and I drive a mix of city/highway.
My cx9 was at 3mm on the rears at 52k. Get a caliper compression kit and it yourself. It's not very hard. I did my rears a month back in my driveway for $130.
Just had a dealer give me an estimate of $560 for new rear pads and rotors. Unfortunately, the idiot was going by mileage and he never actually looked to see that I just replaced the pads and rotors myself 10,000 miles ago. That was on my 2016 Mazda CX 5.
Write your review
Help others - share your experience with this part.