Engine oil Castrol or OEM Subaru
Castrol EDGE Euro is also VW 508 spec.
The mechanic is absolutely wrong. You must use a 5W-40 C3 oil with the Fiat 9.55535-S2 specification, I use the Castrol Magnatec 5W-40 C3, which is cheap and easy to find, but any other brand with the correct specification is fine. A 0W-20 oil has insufficient pressure and film strength, and will lead to damage over time.
I have a 450k km 1.9 tdi, and a 300k km 1.6 tdi, i always use 5w30 castrol, no issue.
My mom's impreza will loose oil between oil changes with 0w-20 and will be fine with 5w-30. It burns the thinner oil.
My wife\u2019s 2012 Impreza is at 195k miles and I switched it to 0w-30 and then 5w-30 due to oil consumption. Was burning a quart every 1K miles on 0w-20, burns half that on 5w-30. I\u2019m actually considering going thicker.
The dealership here itself was using 5w-30 as the default for oil changes even though 0w-20 is stamped on the filler cap. After checking myself that Subaru said that would be OK, I started using it too for my own changes just to avoid flipping back and forth -- though I have no idea if that would be a problem. In any case, the Forester seems happy, even if the mileage may have dipped slightly.
Engine does become a bit quieter with 5w-30.
I would only suggest using \"premium\" oil brands, like Castrol or Elf, in correct specification.
Castrol is fine
It\u2019ll be okay. Subaru engines are robust and that mix rate won\u2019t increase the viscosity enough to affect the oil flow rate out to the cams.\nPardon my skepticism regarding Castrol oils though. Haven\u2019t been a fan of them since the GTX days. The additives they\u2019d chuck in their generically sourced base oils glazed bores and gummed lifters.\nCost many a machine shop like ours a fortune in comeback work.
Write your review
Help others - share your experience with this part.