I'd consider the KONI STRT if available for the 2012.
Pros: consider KONI STRT
Vehicle:
Mazda 3
Best Shock absorbers for Mazda 3
I put Bilstein shocks on my 2016. they were a good upgrade in ride quality
Pros: good upgrade in ride
Vehicle:
Mazda 3
Yes, you can use OEM springs with the Bilstein B6. I have them on my MS3 and the ride feels much more planted compared to the stock shocks / struts.
Pros: more planted ride
Vehicle:
Mazda 3
After almost two months and driving 4000 kilometers on varying quality mountain roads, I think I made a good decision when opting for the Koni Special Actives for my 2006 Mazda3. I expected them to be a bit softer, as they are stiffer than the Koni FSD. They are not uncomfortably stiff, shielding people inside the car from harsh roads and speed bumps. The car feels really stable. Summarizing my impressions so far: reduced high frequency noises and jolts, reduced body roll and pitch, increased stability, the car feels more composed even in extreme situations, and feels more premium. The faster I go on bad roads, the smoother it feels.
Pros: reduced cabin noise, increased stability, smoother on bad roads, reduced body roll, premium feel
Cons: expected softer ride, audible suspension work
Vehicle:
Mazda 3
Mileage: 4000 km
Our 2013 Mazda 3 has been BULLETPROOF reliable for 185k miles. Never been in the shop once for any reason. Other than normal disposables, I've replaced the shocks at 180k, both front wheel bearings at 150k, and a MAF sensor around 160k. All easy DIY jobs. Also did a serpentine belt/tensioner at 160k. Other than that, just fluids and tires/brakes.
Pros: BULLETPROOF reliable, easy DIY
Vehicle:
Mazda 3
Mileage: 297728 km
KYB. Used on my gen 1 and worked great. Tried Monroe on another vehicle and they were soft and bouncy, replaced those with KYB also.
Pros: worked great
Cons: soft and bouncy
Vehicle:
Mazda 3
2 year later update: finally decided to get new shocks, kyb this time. What a world of difference. No bounce and am using the same bump stops as before.
Pros: no bounce
Vehicle:
Mazda 3
Maganda ang ride ng Mazda. Pero they placed themselves as as luxury car brand. A friend has an 8-year old 3. Kelangan na palitan ng suspension. She was quoted just under 40K sa casa. Just for shocks replacement.
Pros: Maganda ang ride
Cons: pricey shocks replacement
Vehicle:
Mazda 3
At 100,000km I did Koni STR.T shocks, Eibach springs and a Progress rear sway bar. It's a riot to drive with decent tires now however I'm not overly impressed with the Konis, they don't have the best small-bump feel but the car feels ridiculously planted 100% of the time and stays flat through corners.
Pros: car feels ridiculously planted
Cons: not the best small-bump
Vehicle:
Mazda 3
Mileage: 100000 km
i replaced mine for KYB 2 months ago and it was awful.
Cons: awful performance
Vehicle:
Mazda 3
Write your review about shock absorbers
Help others - share your experience with this part.
Other spare parts for Mazda 3
Voted AGAINST engine oil RAVENOL on the rating page
The power steering pump OEM Volvo got the first review!
The brake pads OEM Infiniti got the first review!
The brake cylinder Raybestos got the first review!
For tires OEM Toyota already 25 reviews.
For tires IRONMAN already 25 reviews.
In the rating best fuel pump already 5 brands participate!
In the rating best antifreeze already 9 brands participate!
In the rating best engine radiator already 9 brands participate!
In the auto rating shock absorbers for Ford Ranger already 20 brands participate!
In the auto rating brake discs for Volkswagen Golf already 10 brands participate!
In the auto rating headlights for Volkswagen Golf already 5 brands participate!
For wiper blades PIAA already 100 reviews.
Voted AGAINST engine oil RED LINE on the rating page
Voted AGAINST engine oil PENNZOIL on the rating page
Top manufacturers of shock absorbers for Mazda 3
This part for Mazda 3 is made around the world. We have reviews for shock absorbers manufacturers from countries such as: Netherlands, Germany, Japan .
In March 2026, the ranking of shock absorbers for Mazda 3 on PartReview included 4 manufacturers. It is based on 11 reviews and 35 votes.
Which shock absorbers to choose for Mazda 3?
Last month, PartReview users preferred KONI. 25% of positive votes went to this manufacturer.
In second place: shock absorbers Bilstein — 17%.
Third place: KYB with 8% of the votes.
In the overall ranking of shock absorbers, which aggregates opinions of owners of different car makes and models, these brands hold the following positions:
- KONI ranked 2, PR Score — 88. Based on 266 reviews and 825 votes.
- Bilstein ranked 1, PR Score — 86. Based on 649 reviews and 2005 votes.
- KYB — rank 3, PR Score — 78. Based on 156 reviews and 492 votes.
Other parts for Mazda 3
After seeing which shock absorbers owners of Mazda 3 prefer, check other popular parts for this car. In March 2026, leaders on PartReview were:
- #1 Spark plug NGK - 53% votes.
- #1 Brake pads POWER STOP - 12% votes.
- #1 Wiper blades Bosch - 20% votes.
- #1 Engine oil OEM Mazda - 25% votes.
- #1 Tires Continental - 11% votes.
You can also see what Mazda 3 owners chose among such parts as: Brake discs, Battery, Oil filter, Cabin filter, and others.