This question seems to come up every few weeks - grab these Anco wipers. Fairly cheap, and do a great job for a year or so. Expect some streaking after a year, but definitely better than the OEM Bosch wipers
Reviews of ANCO wiper blades
98 votes
Anco Winter Blades. They don't work the greatest at high speeds since they are solid and catch the wind
The fix was two new decent blades. Anco worked great for me. $26 from Amazon and it's done.
I've got the Anco blades as well and have driven through some pretty nasty south Florida weather. Haven't had any complaints or issues with the wipers at any speed.
I have Anco wiper blades, which I previously recommended as a great deal on Amazon.com, both for price and because they attach directly, with no plastic adapter hardware needed. At speeds between 70-80mph, both wipers left areas of no-contact with the windshield, worse on the passenger side.
After having these for a couple months I wouldn't recommend them. They are better than stock, but only barely.
I have had mine on my Ranger for my 3rd winter in Maine. Great blade.
Anco C-24-N: http://www.amazon.com/gp/product/B00HQZ92UQ/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1 Anco C-19-N: http://www.amazon.com/gp/product/B00HQZAYC6/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1 These are the ones I bought for my '14 GLI and they both clipped in exactly like the OEM ones. Took me 10 seconds to install them. Easiest blades I've ever installed on a car!
Heck I buy the Cheap $4-5 walmart Anco wipers. I Washington you'll burn through a pair of wipers in less than 3-4 months. I forked over $30+ for a set of those bosch Icons, took them back the same day. They only would wipe the first inch of the wiper ends. My Corrado windshield and crappy wiper arm design just make pay $$$ for wipers a stupid investment when the $4-5 ones do better than spendier options.
I bought a 13" replacement blade from the local Wal-Mart: manufacturer 'Anco', part number 31-13. Price at my store was $4.57. It looked like it would slip right in to replace the entire wiper & blade assembly... but unfortunately, the 'cage' is too wide, and it won't fit into the A3 rear wiper receiver. -So -having spent the money & opened the pack, I decided to try using the blade and metal reinforcing 'springs' in the old (Audi OEM) wiper blade. I had to bend one 'claw' of the replacement Anco blade open, to get the new insert and metal strips out (the strips have a 'lock' which prevents them sliding out). Then I had to persuade the OLD rubber blade and spring-steel reinforcement strips out of the OEM blade assembly. -This was a bit tricky, but I was able to to slide them out. Then I slipped the new rubber and metal reinforcement strips into the old OEM blade assembly... but be sure to slip the 'clip' end in LAST, and also make sure that the three little 'teeth' on the inside faces are alongside the rubber, so that they grip it and prevent it from slipping out. UNFORTUNATELY... the replacement 'blades' are about a quarter of an inch too short, and the end away from the clips doesn't support the rubber all the way to the furthest 'claw'. -This means that if you try to run them this way, the rubber will eventually slip out from the end of the blade, leaving the 'claw' to scratch the glass. I bodged a 'fix' by re-using the OLD metal blades AS WELL AS the new ones. -You have to do this on both sides. -It's an absolute bugger to get them in all the way, would probably be a little easier if you 'lubed' up the slots that they have to slide in (the rubber slots alongside the other metal blades) with a dish soap solution or something similar, but -using a pair of pliers and some creative curse words, I got them to slide in. So... for less than five bucks I got something to work. HOWEVER... It's about a quarter of an inch shorter than the OEM blade, it's a WHOLE lot of farting around, and I think every time I do this from this point onward, I'm going to just buy the OEM blade and have done with it. -The saving is about $3, and the hassle and all of the fiddling simply isn't worth it.
Write your review about wiper blades ANCO
Help others - share your experience with this part.