these older calipers are notorious for binding up on the ebrake actuator go get a newer pair at the junkyard new design is better.
I have the oem blue center caps otw but am not installing them until I powdercoat my Porsche calipers blue in the spring(currently red).
I’ve rebuilt the front calipers, upgraded the rears to MK4 callipers, new pads and rotors, new proportioning valve, TT stainless brake lines.
I have done both the front and rear Golf R swap on mine. Tiguan rears are 300x11mm solid discs, Golf R are 310x22mm vented discs. Rears bolt right up, only thing to be aware of is you need to swap the electric ebrake motors from your stock calipers over, as the R calipers do not include them.
Can vouch for the MkIV rear conversion w/ Passat lines, did mine last year after OE calipers siezed. Good and cheap upgrade.
Enter the 17z Porsche upgrade. I believe this is the cheapest route you can go for a good BBK of this size aside from the even bigger 18z Brembo's also availible. This is a very easy direct swap with two modification parts You'll need the calipers and pads from an 04-10 Porsche Cayenne The 334mm rotors and front SS lines for the mk4 r32 The adapter plate from Ecstuning made by creationsmotorsports It's just 10 bolts for the install, that's it. Jack up the car talk off the wheel Disconnect the brake wear sensor Without taking the brakes apart, clamp the brake hose, disconnect from the caliper, remove the two caliper carrier bolts and yank the caliper, pads an all off, put to the side an do man shout. Unscrew the rotor screw an beat it with a hammer like it owes u money, unless you plan on keeping it. Cut the brake sensor from the brake pad and connect the two together Install new rotor The slots don't matter which way but the vanes do. Make sure they flow like shark fins to the front of the car Now if you didn't notice when you go to install the adapters your caliper carrier bolts are now too long and when you go to tighten the adapters you might not notice but you will screw into your new rotors either pushing the rotor off snapping the rotor screw or stripping the spindle tread whichever comes 1st. Get new bolts and grind or cut then about in half USE THREAD LOCK!!! Install adapters and calipers Unless you have an r32, the brake lines will not match back up, so until you come up with a solution zip ties will be your friend You can easily bend but I didn't have enough time on my lunch break. Connect an bleed the system an that's it's your done. So the verdict. If you don't bleed the system enough, the 1st pedal push will feel like your stepping in poo. You have to bleed A LOT to get your pedal back bleeding through the abs using VAG Do you have to change your M/C no. If you do not change your M/C you will be ok. If you want to go that extra extra route for increased pedal feel the Audi 200 M/C is supposed to be used. I will be doing that as well because i'm extra with stuff. I already purchased it just have yet to install it The vw M/C is black and aside the 2 extra ports and the slant looks like it's a go. That's for when the weather gets better. I hope this was helpful.
I feel no difference in pedal feel or stopping distance. It's the aesthetics that made the difference for me.
I replaced both rear calipers, pads and both electro mechanical parking brake motors on my 2009 Tiguan. Now the yellow 'P' dashboard symbol is always on.
Just wanted to update this thread. I too have a 2013 vw beetle. I originally put on the mk5 r32 front calipers which was rubbing on my rims. They were squeaky and the brake response was way too much when just pulling out when first started.
The 944 caliper is 26x30 mm apposed to the g60. the reason I am posting this is because I purchased a set of 944 calipers on a whim, and found out they are not much more of an upgrade from g54 calipers.
Write your review
Help others - share your experience with this part.
Brake caliper Brembo or Girling
Brake caliper Girling or OEM Volkswagen
Brake caliper Brembo or OEM Volkswagen
Brake caliper Girling or POWER STOP
Brake caliper Girling or OEM Porsche
Brake caliper Brembo or POWER STOP
Brake caliper Brembo or OEM Porsche
Brake caliper WILWOOD or Girling
Show allVoted AGAINST engine oil RAVENOL on the rating page
The brake pads NIPPARTS got the first review!
The brake discs Hella got the first review!
The brake discs OEM Suzuki got the first review!
For tires OEM Toyota already 25 reviews.
For tires IRONMAN already 25 reviews.
For starter motor OEM Volkswagen already 25 reviews.
In the rating best ignition coil already 13 brands participate!
In the rating best fuel pump already 5 brands participate!
In the rating best turbocharger already 4 brands participate!
In the auto rating headlights for Volkswagen Golf already 5 brands participate!
In the auto rating brake pads for Mazda 5 already 10 brands participate!
In the auto rating brake pads for BMW M2 already 5 brands participate!
Voted AGAINST engine oil RED LINE on the rating page
Voted AGAINST engine oil PENNZOIL on the rating page
