Brake discs Centric or Duralast
centric blank rotors is the way. they are the supplier for powerstop and many OEMs. im sure for other aftermarket companies too. they are top tier
get Centric 120 series rotors. Way more braking than stock and zero noise.
Dynamic Friction makes a good geomet-coated rotor that is excellent for what they cost.
Dynamic Friction are great with ceramic pads, only complaint is cosmetic, they do not coat the rotors so after some rain the inside hub of the rotors starts to rust. Purely cosmetic, great rotors! I drive them fast regularly and they perform better than OEM
when I did the brakes on my ‘17 GTI about 20k miles ago I used Duralast Gold rotors and pads from AutoZone. Low dust, low noise, stop fine and the rotor hubs are coated so they don’t rust in five minutes. They’ve been perfectly cromulent.
I use Centric rotors/drums and Akebono shoes/pads from RockAuto. They work fine, despite FUD on OEM for shoes.
I'd also recommend centric for the rotors.
My solution is to always use top of the line brake pads like PFC 11s or raybestos st43 and up.
The other thing I ended up doing is once I really started being able to push the car hard, I installed Porsche 911 993 air deflectors on the lower control arms and that increased airflow was just enough to let me get away with keeping the small brakes. This past weekend I was at VIR and I was getting up to 130 on the straights, even bumping up against the rev limiter in fifth before braking for roller coaster, and the brakes held up fine. That and $30 RockAuto centric rotors.
I had the Centric rotors for both the front and rears. I'm replacing the rears Cemtrics next week which have 48k km on them with Raybestos Element 3s because they are highly recommended here and I wanted to try something different. I have a feeling my rear centric rotors have been ruined by the akebono pads which I think have gone down to the metal and are creating a groove in the rotor. Sad that this is all happening at only 48k km.
It looks like you got the C-tek ones, which don't have any protective coating on the non-wear surfaces, which is why you see the rust.
Write your review
Help others - share your experience with this part.
Brake discs Zimmermann or POWER STOP
Brake discs Brembo or Zimmermann
Brake discs Brembo or POWER STOP
Brake discs Zimmermann or Centric
Brake discs Zimmermann or STOPTECH
Brake discs Zimmermann or OEM Volkswagen
Brake discs Zimmermann or EBC
Brake discs Zimmermann or Raybestos
Show all