Brake pads Akebono or WAGNER
When I did my Civic, I went with Wagner Thermoquiets. But I'm not aggressive on the brakes. They're silent, and clean. They'll still cause ABS to engage if I hit the pedal hard.
I now use the Wagner pads the I can get through Advance. Last set went 60K and I just replaced them before the state inspection in October. Technically they would have passed but I just changed them out just so I didn't have to worry about it for a while. For $60 for an axle set, I can't complain. Cost way less, last much longer, easy on the rotors and don't dust the hell out of the wheels. They take a bit more brake pedal pressure but that is OK because it actually helps on brake modulation.
Akebono ceramic pads (ACT888) - not much brake dust, good cold bite, good wet bite. EBC rotors. Rockauto will have them - great website, btw. I got EBC simply because the rotor hats are painted black. My g35 had the rotor hats with a red ring of rust on them, looked awful. In hindsight, really any rotors will be fine. Centric premiums are ok, probably around 50 bucks each - I think they have the black painted hats as well. Akenbono pads were maybe 100 for the 4. I think I got those on Amazon. They have ones that are OEM form factor. Drilled/slotted are for racing applications, not so much for dd. Not necessary to spend the money on those. And by racing, I mean you are stomping on your brakes 20 times in 5 minutes, for 10 laps. You'll end up replacing the pads and rotors pretty quickly due to the sheer heat involved in constant hard braking. So the longevity involved is... 1 track day, or two track days. Brake pads and rotors are fundamentally a wear item. The pads/rotors will wear over time regardless of DBA's "kangeroo paw" ventilation system - DBA 4/5000's are what, 200 bucks a pop. It really doesn't matter. You should get 25,000 miles out of pretty much any set of brake pads and rotors almost regardless of what brand they are. No reason to buy 800 dollar set vs 2-300 dollar set unless you are literally a racetrack driver. I'm betting my EBC rotors and Akebono pad combo will last about 50,000 miles, seeing as how my sedan is a dd that I pack my kids into.
I just put a set of Wagner on the rear of my E60. Same pad specs and a perfect fit. The car stops dead fast.
I personally use Wagner Thermoquiet for my BMW because of low dust and noise-free. They are great pads.
According to Rockauto, Wagner ThermoQuiet parts are available for that car. I would just get those - I've used them on everything I've owned for the past 10 years or so with good results.
My Father works for Akebono. We run their pads on a lot of cars (Mainly my GTI and a buddy's FoST) and I prefer the Euro sport ceramics to hawk HPS pads or any other pads I've tried. The Euro Ceramics are absolutely great. They have greatly decreased dusting over stock, less noise when both cold/hot, and stopping power is improved over stock.
I have Akebono pads on my '13 allroad ------ probably a 95% reduction in brake dust compare to the OEM pads. The Akebono's have been great.
i have akebono pro act ceramic pads on my golf with 20thAE brakes. they dont seem to be wearing down in the past 5 years, and the rotors have no grooving or wear on them. nice change from doing an annual 4-wheel brake job :thumbup:
My stock rear brakes never made any noise. Recently replaced rotors and pads - went with Akebono Euro Ceramic - and now have the same "clunk" you describe. Usually only first thing in the morning when I back out of my driveway and then roll forward and brake.
Write your review
Help others - share your experience with this part.