Brake pads ATE or Carbotech
I just switch between track and OEM pads. I can usually get 4 to 5 tracks days out of the Carbotechs that I run. I drive my car to the track, so by the time I get there the track pads have had plenty of time to make friends with the rotors. Same thing with the OEM pads. It just take a little bit of driving for them to settle in.
carbotech xp10/xp8(f/r), not a daily but the car sees plenty of street miles. they are noisy and dusty but this setup has been perfectly fine for me.
I went with ATE all around, very very good for the price.
I only use ATE. Just got new Pads and Dics in Front and Pads in rear on my m235i Brake dust is there but no to extreme.
I put ATE performance discs & ceramic pads on my e39. The discs won't make a difference but it's nice to pair up brands. Ceramic pads make a huge difference to the amount of dust though.
I’ve used carbotech XP10 for years because it’s the only pad that has never had any of these kinds of problems. Also also swapped between 1521 and XP10 seamlessly. The only time I had a problem like this was when I used some very cheap rotors that couldn’t handle the track abuse, you could actually see the rotor surface getting pitted. Yours look fine by comparison.
For my GR86 Carbotech XP10s have been amazing on the track, seriously no complaints at all. The XP10s with Castrol SRF have been a great combo and held up really well even on some really big/high speed tracks. I swap in my OEM pads when I’m not tracking the car for awhile. It’s not great because I have to bed the pads every time I change them. Once I’m through the OEM pads I’m going to get the Carbotech 1521’s for the street, that way like you mentioned I think I can avoid having to avoid bedding my brakes with every change. The XP10’s function well on the street but they feel a little rough if not up to temp and they are insanely loud.
Cele mai bune placute aftermarket sunt ATE normale, ATE ceramic nu franeaza la fel de bine, dar tin mai multi km.
We use ATE here in Germany. Rear brake pads will probably require a diagnostic device to disengage the electrical parking brake.
I ran into some brake issues. The pedal started getting squishy even in wet conditions. It never got dangerously deep, but it was still unpredictable. In the last session, the track dried up and I was able to push. I experienced somewhat serious fade. I had to absolutely stand on the brake pedal to get the car stopped. After pulling into the paddock and circling around to let the car cooldown, I still smelled brakes for the next 20+ minutes. The pedal firmed up on the way home.
Write your review
Help others - share your experience with this part.