Brake pads Bendix or WILWOOD
Here's mine. MMP adapter brackets, stock 11" rotors, BP20 pads. Work very well.
I've got them on my SLC as well. They are amazing. I have stainless hoses and drilled/slotted rotors all around. Went from stock brakes with mintex red box pads, to Girling 60's with hawk hps pads, and put Wilwoods on it last year and the wilwood's just blow the others out of the water. AND they fit under the stock wheels.
I got my brakes yesterday, they are freakin awesome, finish looks really good. i am going to put them on this weekend
Bendix Titanium pads with new rotors 4/20/02
I do like the wilwoods on my car, stops good, lots of choice in brake pads.
i had them on my mk3 jetta and there was a huge stopping difference without locking them up. a very good investment , initially they came with hawk pads they were too noisy and i switched to ebc pads and i loved the brakes quiet and stopping distance was probably reduced by 1/3
I had the wilwood 4piston kit w/11.3" rotors and stainless lines and the biggest difference I noticed was: Firmer pedal (stainless lines) Less fade when hot Better handling due to unsprung weight ABS stayed off a little better BUT: I couldn't use them w/factory wheels Had to take them off and put them on when I changed my summer rims Overall, Save your cash and get some good ss lines, pads and xdrilled rotors. Are you really going THAT fast that you need all that clamping power? Furthermore, your tires (type, tread, condition, etc.) and the alignment have almost as much to do with effective braking as fancy calipers, expensive fluid and the like.
the Wilwoods are quite light. they don't have much pad contact area though. the big advantage with the Stoptechs would be the cooling and contact area.
I put in some new rear brake pads today. The frist brakes I had were Autozone brand. Well, they went on fine on the driver side. On the passenger side It was near impossible to push the piston back far enough to get the pads on. I still needed about another 1/16th of an inch. I even bled brakes a little to make room for the piston compression. Still no luck. So I went back and bought some Bendix that were about 1/16th less in thickness. So, I put them on the passanger side. I had to wrestle with the piston again - that mofo would not budge. Finally I got it. So, I go for a drive with Albany brakes on one side and Bendix on the other. A horrible scaping erupts from the driver's side. The side that went on much easier. Visual inspection looked ok. So I took them off and they were all scraped to heck. Strange, as that was the easy side. So, I put the Bendix pads on that side and everything is fine.
Wilwoods suck.
Write your review
Help others - share your experience with this part.