Was told to replace all my discs and brake pads too a few weeks back when I did my MOT. Tight on money atm so decided to do it myself and I’m glad that I did because I saved myself a lot of money, only paid for parts and then a few hours of my time. Ordered the whole set from AutoDoc and the total was £220 for Bosch parts, so not exactly budget either. Also, garages with cheapest quotes might opt to use budget parts which could end up squeaking etc, so just keep that in mind, but I’d say do it yourself if you wanna save the most money.
Bosch quiet cast brake pads and rotors are a phenomenal aftermarket option.
Got them on. Lasted for a good amount. 20k miles. Weekend track slowing from 160mph+ don’t use ceramic pads something softer would be better
The problem is the OEM pads. I replaced my pads and only the pads with BOSCH pads, and it brakes fantastic now.
If you are looking for the best brake pads and rotors that will not pulsate, last a long time and work across a vast of vehicles, I suggest you look into Perfect Stop.
I've got AutoZone's gold ceramic pads on mine right now. They are made by Bosch, I know because they drop-shipped from the Bosch factory. Grippier than OEM, quiet for daily driving and decent for spirited driving.
Just bought a set of Bosch F & R brake pads w hardware for $66 (including tax) on Amazon. For my 2007 Infiniti M35. Fit perfect. Good quality.
I have R1 on now all around and no issues since.
New rotors and pads without breaking in at all, just normal driving as soon as changed. Pads lasted 30.000km ish, while rotors wrapped at about 40.000km ish (pads replaced at 30k with same R1 concepts). Brake feel and performance was OK, but much worse than when broken in. Light squeal at about 15.000km and onwards. New rotors and pads following break in procedure, 10 stops from 90km/h (55mph aprox), never coming to a complete stop, then driving 30 minutes never coming to a complete stop, rolling to a stop on neutral and waiting another 30 minutes. Pads lasted about 40.000km ish, rotors lasted 80.000km ish, pads replaced at 40.000km with same R1 concepts ceramic.
For my (owned 3 years, purchased used) 2014 Honda Crosstour I've always had to grind down the edges of the pad mounting plate tabs on Bosch brakes a couple of mm to get it to fit into the calipers. I have just received a new set, and while I still had to grind down the edges to get them to slide into the calipers, the top and bottom edges were MUCH shorter than the previous pads. So much so that when braking after reversing direction, the pads will shift in the calipers with a noticeable 'click' as the brake pads engage the disks to slow the car and are thus moved to the other end of the caliper. The overlap between the brake pad plate and the 'C' in the caliper where the tab meets the caliper is only 2mm or so. Definitely less than I am comfortable with.
Write your review
Help others - share your experience with this part.
Voted AGAINST engine oil RAVENOL on the rating page
The brake pads NIPPARTS got the first review!
The brake discs Hella got the first review!
The brake discs OEM Suzuki got the first review!
For tires OEM Toyota already 25 reviews.
For tires IRONMAN already 25 reviews.
For starter motor OEM Volkswagen already 25 reviews.
In the rating best ignition coil already 13 brands participate!
In the rating best fuel pump already 5 brands participate!
In the rating best turbocharger already 4 brands participate!
In the auto rating headlights for Volkswagen Golf already 5 brands participate!
In the auto rating brake pads for Mazda 5 already 10 brands participate!
In the auto rating brake pads for BMW M2 already 5 brands participate!
Voted AGAINST engine oil RED LINE on the rating page
Voted AGAINST engine oil PENNZOIL on the rating page
