I replaced my rear pads with Raybestos EHT1761 at 23,000 miles. I did not replace the rotors as they were undamaged. I did buy rear rotors, Powerstop EBR1697EVC. I am at 37,000 now with no dust, no noise, and minimal pad wear.
On rockauto, Raybestos sells the element 3 rotor and brake and rotor kit. Basically all I use for my brake changes now. Great stopping power, and pads last a good while also. Highly recomend Raybestos element 3.
For aftermarket pads, Raybestos have had very good fitment and quality, I dig it. Their product line is called like "el3ment" or some such.
Look on rockauto, and look for the brand called bosch, they kick ass and are oem quality
I would go with the Raybestos Element 3 kit sold here. $180 total roughly front and back. 2 seperate kits, one for front, one for back. You will find this under the fully coated section here as they have different grades of pads. For the price and how long these last, you cannot beat it. And better than the top quality parts local parts stores carry, in fact Napa sells these rebranded as their premium top of the line brakes and rotors. For the price, and the quality, is by far your best option. There are better pads that will last a little longer, but are much more pricey. With the miles you drive, these will last 5-10 years. I use these on all vehicles in the rust belt, as these are rust coated.
I bought Raybestos Element 3 Hybrid pads and couldn't be happier. They squeal a tiny bit when very cold but I trust these brakes to get me down a mountain.
If you're keeping the vehicle (make sure you're keeping it), then I second getting the raybestos from Rockauto. Make sure you get the raybestos element 3 fully coated rotor and pad sets.
Even if your friend's dad does it free, maybe drop him $100 or $200 for the labor.
So $200 total. And less dust than OEM with decent stopping power. I went with this combo cause it's balanced stopping power and rotor longevity.
I went with Raybestos rotors and Bosch QuietCast pads. Equal if not better than OEM and much much cheaper.
I replaced the pads and rotors on my Jetta this past spring. I put on Raybestos Element3 pads and coated rotors, and I've put maybe 6k-ish miles on them since then. Everything was fine for a while, but lately a squeal started to slowly develop until now it's every time I use the brakes. It sounds exactly the wear indicator noise I'm used to hearing when pads are low.
I installed these less than a year ago on my 4runner. At first, I thought the squealing was going to go away after I broke them in. But almost a year later and they squeal really loud even if I brake slowly at low speeds.
Write your review
Help others - share your experience with this part.
Voted AGAINST engine oil RAVENOL on the rating page
The brake pads OEM Alfa Romeo got the first review!
The tires OEM Fiat got the first review!
The ABS unit OEM FORD got the first review!
For oil additives LIQUI MOLY already 25 reviews.
For tires GISLAVED already 25 reviews.
In the rating best cabin filter already 13 brands participate!
In the rating best shock absorbers already 13 brands participate!
In the rating best fuel pump already 5 brands participate!
In the auto rating shock absorbers for Ford Ranger already 20 brands participate!
In the auto rating headlights for Volkswagen Golf already 5 brands participate!
In the auto rating tires for Toyota Corolla already 50 brands participate!
For cabin filter Fram already 25 reviews.
Voted AGAINST engine oil RED LINE on the rating page
Voted AGAINST engine oil PENNZOIL on the rating page
