Brake pads Ferodo or OEM KIA
I was a huge fan of Ferodo DS2500s on Centric rotors. They performed insanely well for street duty and were decent enough for track days.
Ferodo DS2500 is about the best pad you can get.
I've got OE spec ferodo on my 208 GTi no complaints from me, got brembo on my Saab 9-5 aero again all good I would avoid the cheaper end of the market
Ferodo DS2500 were good in my daily/tracked GTI and track NB Miata, until I got GLOC track pads on the latter. Which are awesome. BUT the DS2500 held up to the track really well, I'd definitely say for a daily that gets tracked they're about as good as you might get. Grease the contact points on the pad with copper or other compatible grease and i think they don't make much noise at all.
I'm running Ferodo DS 1.11. and they're fine on the streets even during winters when it gets even as cold as -25C
I got their vented rear and front rotors (Girodiscs) with stock calipers and Ferrodo DS2500 pads all around. For a stock powered car they work great at VIR. I have done 2 sessions there now and braking is pretty decent. On the street this combo will never fade period. The rears overheat which overload the fronts and cause issues. Rears overheating also causes the wheel bearings to go out so getting vented rears is just smart.
Ferodo DS2500 are a classic high performance street pad, every time I go through a set I am sure something better must have come along and do some market research, always end up back on the DS2500´s as an everday/occasional track pad. They are cheap and they last forever (really) relative to punishment taken, they are dusty though, that´s really my main issue with them.
2x som menil brzdy, oba razy za cca €400.
Lastly, I had the well-known brake pad deposit problem on the rotors, which over time (about 5-6k miles for me) would cause the steering wheel and car to shake a bit when breaking, similar to the feeling you get when the rotors are warped. I had the rotors cut once, then all four rotors and pads replaced, and then the front rotors were replaced again. As many other Stinger owners online have said, once they replaced the stock rotors and pads with a good set of aftermarket rotors and pads, or some even just machining their stock rotors and getting new aftermarket pads, that seems to have solved the issue for them.
I hated Ferodo DS2500 on the street. Because they need to be warm to perform. And if I am driving on a highway for couple minutes or through a city, they loose the heat and perform badly for a bit.
Write your review
Help others - share your experience with this part.