Brake pads Ferodo or OEM Porsche
Very happy with the setup. I’ve failed to get it to fade on either mountain roads or the track, but never done long stints, maybe 20 min max. The DS2500s are nice because you can swap them out for other more or less aggressive Ferodo compounds without issue.
I ran Hawk pads on cars in the past and hated them, can’t say enough good things about the Ferodos.
I would recommend first to switch fluid for Castrol SRF then switch to Ferodo DS1.11 brake pads exclusively for track use and DS2500 for daily/canyon carving.The beauty of Ferodo brake pads is that it not needed to re-bedding your pads when switching compounds as long as you stay within the Ferodo family.DS1.11 are endurance pads that love to operate in very high temperatures which might not require cooling ducts.
Ether Motul RBF 600 or Endless RF650 brake fluid is a good options. As far as pads go Ferodo DS2500 is a great pad for street/track. It has relatively low dust and noise levels compared to other track pads, yet still has moderately high bite and solid fade resistance of a track pad.
I had a 172,Clio with ferodo DS2500 pads all round and brembo high carbon vented front discs and solid rear discs.
I own a 1999 996 C2. I have had the car for over 10 years. I bought it with 70k miles, and it now has 169,000 miles.
It is in the garage now waiting for front brakes. Have the parts, just got busy.
I'm not sure if it counts, but I put porsche brakes on the front and TTRS brakes on the rear.
I run the Ferodo DS2500 which would probably meet your criteria. Fair warning though - they make noise, especially in the fixed Brembo calipers. You have to regrease them every few months.
Many people don't like ferodo pads, but I use ds2500 for dual duty, but they can be hard to find. Just got to be careful getting off the highway with them when they are cold.
Up for sale are new Ferodo DS2500 brake pads for an MK7 Golf R. I had bought these to replace my noisy new Hawk pads, but have decided to just stick with the noisy hawk pads.
I put some Ferodo DS2500s for a HPDE event at the end of July and noticed discoloration and crumbling on the edges. Swapped them out with PFC08s for this weekend’s HPDE and noticed chunks of material missing from the inner of the pad.
Write your review
Help others - share your experience with this part.