Brake pads Ferodo or OEM Subaru
For track purposes, I upgraded my rotors to stoptech slotted, pads to ferodo 2500, steel lines, and rbf600 fluid. Gets the job done, and stays consistent over the course of a typical track day. The braking power/feel is not much greater over the stock rotor/pads combo, but holds up better to the heat (those OEM pads do like to melt, if abused).
I also run Motul RBF600 fluid and Ferodo DS2500. I use my R as DD (~13K miles/year) and about 10 track days per year. Setup is fine for both and I recommend it as a good setup for your situation.
I typically run RBF600 with Ferodo DS2500, changed at the beginning of spring and after each HPDE (back to OEM brake fluid in the winter). Massive improvement over the stock for sure, but at the end of a 2 day track weekend the pedal will be on the softer side, which improves after brake flush.
I have had good success with Ferodo DS2500 pads front and rear, OEM rotors, and RBF600 (or equivalent) brake fluid. The Ferodo pads were fine to use for the street (no noise, normal dust, and seem reasonably rotor friendly) and competent on the track.
Ds2500 are at least oem dust level from what I've heard but better performance and they do squeak a bit.
Replaced my pads and rotors about a year ago. Went with some steel slotted rotors and Ferodo DS2500 pads, for a total of probably less than $1000 all around. The Ferodo pads are much more linear/progressive in feel, whereas in my opinion the OEM pads had way too much initial bite and were too grabby, which is less than ideal when you're trying to be smooth. Additionally, the ferodo pads hold out far longer on the track before fading, while still handling adequately for daily driving (including in the winter).
I'm using Ferodo DS2500. Good pad for both road and track duty.
I am very happy with Ferodo's DS2500 pads. I also prefer not to swap pads and just run one set that works for both street and track. I participate in autoX and HPDE events - mostly the latter this year. The Ferodo pads have great initial bite when cold, perform well when hot, and seem to be easy on rotors
I think my DS2500s were a good bit dustier than stock
my local Subaru dealership listed my brake pads as needing replacement soon when they were literally brand new. That was because their system simply saw that I had 40,000 miles and had no record of the replacement. Nobody had actually examined my car to see if it needed brake pads.
Write your review
Help others - share your experience with this part.