I love the Ferodo DS 1.11 that I use on my M4. They're noisy and the dust is epic but they're totally fine to drive to and from the track. I've used them at a few track days at California Speedway, they're wearing really well, and I've never had even the slightest fade.
I purchased Durango rotors and Wagner brakes for my 2015 cx5 back in May 2018. According to my buddy my brakes were only 50%/35%(front/back/) done. I told him to change it anyways since he pulled them apart anyways. That was around 105k. Around Jan 2020, the rear brakes were squeaking. My buddy pulled them apart, and the rear brakes were completely done. The odometer was around 190k . I replaced them with centric rotors and power stop pads. The front was not changed as it looks like 70 left.
For \~$250, the Ferodo DS2500's are a great pad for dual street/spirited and light/medium track use.With any semi-metallic pad, you're going to have dust. You can't really substantially reduce dusting without going to something like ceramic pads, which then frictional force is compromised.
The heat resistance is much better than the stock pads, so it'd take a lot more to make these pads fade. They are more durable as well at least according to my experience. The only issues are that when it's cold the pads do get a little noisy and there's the increased brake dust, but I think these are non major issues and worthy of the trade off for much better and reliable braking performance.
I used my stock tires 15k mi + 6 track days + 2 driver skill courses - brake fluid (Motul RBF600) - brake pads (I used Ferodo DS2500 on the fronts)
Cut to 2019 and I added Ferodo Racing 2500 pads to the front and they worked GREAT at NJMSP, still with the EBC rears.
Ferodo DS2500 (street/track)-$290.00
For track purposes, I upgraded my rotors to stoptech slotted, pads to ferodo 2500, steel lines, and rbf600 fluid. Gets the job done, and stays consistent over the course of a typical track day. The braking power/feel is not much greater over the stock rotor/pads combo, but holds up better to the heat (those OEM pads do like to melt, if abused).
I also run Motul RBF600 fluid and Ferodo DS2500. I use my R as DD (~13K miles/year) and about 10 track days per year. Setup is fine for both and I recommend it as a good setup for your situation.
Ok, so, at a particular location I worked at we used Wagner Thermoquiets. Decent pads, but this particular location seemed to get the worst quality pads ever. The only way we could keep the customer from coming back was to make sure everything was well lubricated, and we also used some sort of orange goop to stick the brake pads to the calipers. Then we took it out for a break-in session, I believe it was 5 stops from 30mph, gently using the brakes, then another 5 with moderate brake pressure. And if the customer was too hard on the brakes it might still come back.
Write your review
Help others - share your experience with this part.
Voted AGAINST engine oil RAVENOL on the rating page
The brake pads OEM Alfa Romeo got the first review!
The brake caliper OEM BMW got the first review!
The brake pads OEM Infiniti got the first review!
For wiper blades PIAA already 100 reviews.
For battery Energizer already 25 reviews.
In the rating best water pump already 12 brands participate!
In the rating best timing belt already 13 brands participate!
In the rating best head gasket already 3 brands participate!
In the auto rating oil filter for Volkswagen Passat already 5 brands participate!
In the auto rating brake pads for Mazda 5 already 10 brands participate!
In the auto rating tires for Subaru Outback already 50 brands participate!
For cabin filter Fram already 25 reviews.
Voted AGAINST engine oil RED LINE on the rating page
Voted AGAINST engine oil PENNZOIL on the rating page
