Brake pads POWER STOP or Ferodo
I recently (about 5K miles ago) did Powerstops and absolutely love them. I’ve done many brakes on many of my Toyota/Lexus SUVs and most of the time have had best luck with OEM, but the OEM on my Sequoia not so much (warping/pulsing). With much research found the Powerstop drilled and slotted are great for these large beasts…and indeed they are!
Get the Powerstop z36 don’t waste the extra money on the red calipers.
I have had good experiences with PowerStop rotors/pads. I tow an 8k camper regularly with my half ton on stock wheels/height.
I use and recommend the Z23 Evolution Sport Pads. They refer to it as Carbon Fiber Ceramic. It is incredible. It really last a long time. Has great stopping power and it produces very little brake dust.
Their brakes are quiet and last a long time compared to my previous experiences. Pads going on two years. No noise, no squeaks, no rattles. very minimal brake dust.
I got their vented rear and front rotors (Girodiscs) with stock calipers and Ferrodo DS2500 pads all around. For a stock powered car they work great at VIR. I have done 2 sessions there now and braking is pretty decent. On the street this combo will never fade period. The rears overheat which overload the fronts and cause issues. Rears overheating also causes the wheel bearings to go out so getting vented rears is just smart.
I self installed Z23 Powerstop Evolution Sport slotted rotors & carbon fiber ceramic pads kits front and rear from Rock Auto. Superior to OEM in every aspect. Better longevity, quieter, with greatly improved braking.
I replaced the front rotors and pads on my 2020 V60 with a Z23 Powerstop kit I bought from Rockauto. I opted for the standard rotors instead of slotted and drilled. It’s been just over 2 weeks and they are very smooth.
In my experience, I went like 70k miles on the factory brakes. I then went with various rock auto/duralast/car quest rotors and pads over the years and they all sucked longevity wise. Maybe half the life. Warped quickly, reduced bite sometimes
I put some Ferodo DS2500s for a HPDE event at the end of July and noticed discoloration and crumbling on the edges. Swapped them out with PFC08s for this weekend’s HPDE and noticed chunks of material missing from the inner of the pad.
Write your review
Help others - share your experience with this part.