Brake pads R1 Concepts or Ferodo
I have swapped between Ferodo DS2500 (street) and DS1.11 pads without issues. Just go slow to heat them up so you can get the transfer layer applied.
Zimmerman rotors and ferodo 2500ds pads. 5 months old and used in 4 hpde. Im upgrading to a more track duty pad (hawk dtc 70)
I have negotiated with SWMBO that for slightly more than what we would pay to have the dealer do just the rears I could put new slotted rotors (do not want drilled, slotted only), new Fedora DS2500 pads (have them on the FRS and love them) and coated stainless steel brake lines on all four corners and do the labor myself.
I bought the r1 concept rotors+brake pads. They look great and have lasted for about a year no issue at all. Good quality
I use the Ferodo DS2500. I track my car several times a year, but it’s also a daily driver in New England winters.Been very impressed with these pads as they are absolutely silent and still bite in the cold. The only noise they make is a clunk when changing direction front to back (like reversing, then going forward again).Dust isn’t any worse than OEM, may possibly be better actually.If you don’t really care about better performance, find a ceramic pad like PosiQuiet.
A brand new Camaro 1SS 1LE will be $45k. It's the best performance bang for buck on the market and comes pretty much built for track days- it has an extra oil cooler, transmission fluid cooler, great brakes with good street/track pads (they're basically the same as Ferrodo DS2500), and the alpha platform has unbelievable potential. The motor is easy to deal with since it's NA (linear power curve, still makes great tq at lower RPMs) and the eLSD+traction control tuning is extremely competent. I beat the absolute shit out of mine on track 1-2 times a month and it never skips a beat even in the disgusting Florida summer heat.
Stock calipers with ferodo ds11.1 pads
New rotors and pads without breaking in at all, just normal driving as soon as changed. Pads lasted 30.000km ish, while rotors wrapped at about 40.000km ish (pads replaced at 30k with same R1 concepts). Brake feel and performance was OK, but much worse than when broken in. Light squeal at about 15.000km and onwards. New rotors and pads following break in procedure, 10 stops from 90km/h (55mph aprox), never coming to a complete stop, then driving 30 minutes never coming to a complete stop, rolling to a stop on neutral and waiting another 30 minutes. Pads lasted about 40.000km ish, rotors lasted 80.000km ish, pads replaced at 40.000km with same R1 concepts ceramic.
SOLVED - I simply overheated the pads. Spoke to Ferodo and I followed their advice: Bed in was fine. Overheating led to pad material bake to the rotors. 120 grit block sanding on the rotors removed this. Pads were a little glazed but 80 grit sanding removed the shiny bits. Bed in again and running well but haven’t pushed it yet so unsure if the pads are done.
Rockauto carries Dynamic Friction kits. People will say "Rockauto is cheap shit" and then recommend R1 Concepts. But Dynamic Friction OWNS R1 Concepts and all of their pads and rotors are the same. Only difference is R1 does drilled and slotting while Dynamic are just blank rotors. So you really don't have to spend the extra money on R1 stuff. Also, you don't need slotted rotors for everyday driving. Heck, even some track guys still use blanks just fine. Only thing to worry about for track is pads, which I wouldn't recommend any of the R1 stuff for. Had one of their pads claiming both track and street but their pad material on one of their pads completely disintegrated on track.
Write your review
Help others - share your experience with this part.