Brake pads Raybestos or DIXCEL
personally i run dixcel z-type pads and a stock rotor with DOT4 fluid and its one of the best upgrade options IMO
Guy above says don’t go cheap….I just used some raybestos pads and rotors for the rear I got from rock auto for 100$. Cheap, fast and easy. First time doing brakes and despite some snags had it done in an hour.
Fitted my 2017 with new front/rear brakes and rotors yesterday. I went with the daily driver level Raybestos brand kit from Rockauto. Included both pads and rotors with hardware. Did the work myself. While I obviously can't say anything about longevity yet, performance seems good so far. Especially for the price when compared to over double for Duralast from my local AutoZone.
I've had great results from Raybestos ST43s and Ferodo DS2500s for dual duty.
These are the best double duty brake pad I have tested so far. I have tried stoptech 309 and EBC blue ndx which will start to fade around 4-5 laps at my local track. The dixcel pads I can not get them to fade at all. Pad life seems okay with mix use but street manners are abit worst than the stoptech and EBC (sometimes squeals and dust alot).
I'm using raybestos SP436ATRH for the pads and raybestos 96632FZN for the rotors. Been using them since January and have put about 6k on them, living in a really hilly area with my drums being basically useless because the shoes have been coated in gear oil due to an axle leak. I javent had any issues with brake fade or warping and I took them on a 2hr trip to west virginia from central ohio in March.
I replaced my rear pads with Raybestos EHT1761 at 23,000 miles. I did not replace the rotors as they were undamaged. I did buy rear rotors, Powerstop EBR1697EVC. I am at 37,000 now with no dust, no noise, and minimal pad wear.
On rockauto, Raybestos sells the element 3 rotor and brake and rotor kit. Basically all I use for my brake changes now. Great stopping power, and pads last a good while also. Highly recomend Raybestos element 3.
I replaced the pads and rotors on my Jetta this past spring. I put on Raybestos Element3 pads and coated rotors, and I've put maybe 6k-ish miles on them since then. Everything was fine for a while, but lately a squeal started to slowly develop until now it's every time I use the brakes. It sounds exactly the wear indicator noise I'm used to hearing when pads are low.
I got Raybestos pads+rotors back in December… 4mo later and already vibrating when braking so prob warped the rotors, and the pads already squeal at low speed braking.
Write your review
Help others - share your experience with this part.