Brake pads STOPTECH or OEM Volkswagen
Since we had good luck with OE, went OE for replacements. So far, a few hundred miles in, all good.
I’ve tried nearly every pad on the list here and for a dual duty casual track and street car without needing the change pads I have found the stoptech sport and carbotech ax6 good if you don’t want to swap pads which is better for a first timer in my opinion. Otherwise ferodo ds2500 and the other ones in this thread are good if you get more experienced given time. The carbotech ax6 I am selling a set if interested brand new in box but they are expensive as are many suggestions on this list. The nice things about the stoptech is they are a true do all pad that is cheap as well!
For mixed street and track use, I haven’t found a better pad than Stoptech 309. Lots of dust, but no noise on the street and they will take an absolute beating on track (for a street pad). Great modulation at mid temps, low and high temps are acceptable.
Stoptech street performance (I believe renamed to Stoptech sport) has always been my go-to for spirited driving and track day use in a miata. In faster heavier cars, I use carbotechs for track days, but that's just overkill for a miata.
I've done an almost complete overhaul on my bought-from-OG-owner low-k '07 B6 3.6 wagon. DSG from an R36, completely rebuilt suspension front to back on airbags, brakes, wrap, interior, sound system (the list goes on and on) for less than the purchase price of a used-by-who R36.
Have original brakes on it at 66000 miles.
its just the pad compound VW is using because everyone get emotional about excessive brake dust..
I don\u2019t have warping or shimmy issues but above 50ish mph when braking I get this loud whirl or hum type of thing. It\u2019s very loud it\u2019s from the rear. I never had this issue on my s3 and it\u2019s the same setup minus the pads. Not sure. I\u2019m thinking of getting golf r or s3 pads and installing them.
Secondly, defective Rear Disk Brake Pads that wore out on a majority of 22` Taos which was a covered rear Brake replacement if it was under 2ydears and 24 months. I just missed the cut-off and was$700 poorer.
My front brake rotors warped at ~12K miles. I had them machined and they lasted about another 12k until I replaced them with aftermarket Centric. Those lasted ~12K miles until they warped. At this time I went back to VW OEM rotors and they lasted ~12k miles. I had the OEM's machined, but now they are warped again. Along the way I tried some aftermarket pads, and generally had problems I purchased a pair at NAPA and they were sloppy in the caliper and would shift and click when applying the brakes in reverse. Went back to OEM on the pads and have no problems.
Write your review
Help others - share your experience with this part.