Brake pads TRW or OEM Chevrolet
I got the ceramic TRW pads from FCP euro. You can find them from ShopDAP, VW dealership, etc. There’s multiple OE suppliers that all work great: TRW, Pagid, Textar. You can also go for the semi metallic equivalent if you want a little extra bite. I believe they all come with the wear sensor, you can simply cut it off at the base and pull out the wire. I’ve done this twice now, no problems. I suppose you could use the advance auto ones if you already have them, but just know they probably won’t give you as much bite as the stock pads, and may end up causing some warping over time since they aren’t designed for the heat temps.
I was on the hunt for a facelift LT1 car and specifically went after a 95 for the stock bigger brakes and a few other things. I am extremely happy with my purchase and highly recommend.
Job got done in about three evenings Biggest time sinks were figuring out how to use the caliper piston compression tool and getting my overtorqued/rusted lug nuts off. Drove up from Maryland to NYC with no problems so I think I did the job right.
The brake rotors from the Grand Cherokee and Caprice are nearly the same measurements though so I can mix and match. The bonus is that because of the 1996 Impala SS you can get performance brake pads for the Caprice calipers.
I have the TRW TPC1633 ceramic pads installed, perfect fit (OEM) and brake as good as stock...actually smoother. Dust is reduced maybe by half.
TRW Ceramic pads, look identical to OEM, since TRW makes the OEM pads. Feel same as stock, way down on dust.
Finally got around to getting my brakes installed. I've barely put 10 miles on the setup, and the improvement is quite noticeable. Initial bite is improved, and much less effort is required for the same braking force.
Changed the front brake disc and pads (TRW brand) on my car (Opel/Vauxhall Astra J 2016) and noticed my car started to smell heavily burnt rubber after heavy braking when the car stops. I understood that brakes does this in the beginning but now it has gone s month and probably around 150km (100miles) and I also have made some emergency brakes from high speed to speed up this process. So two weeks ago I removed everything and really deep cleaned the caliper and checked the pads. From smelling the pads it seems like it is the glue between the brake pad and the anti squeak plate that cause the smell (?) I also checked the temperature of the brake disc after normal usage and they are all around the same temperature, so I doubt it is a frozen caliper. (Around 70c 155f) but still they smell, maybe a bit less.
There good cars with excellent visibility, but single digit MPG in the city and eats brakes and rotors.
Loose steering, very wallowy, crappy brakes, very much a truck but even teenage me though it felt ancient.
Write your review
Help others - share your experience with this part.