If I used the Valvaline High Mileage Blend oil (red bottle) it would leak less oil.
Might I suggest Valvoline Restore and Protect. It is magic in a bottle and it's anti wear package is off the charts with oil analysis.
Had een Corsa van 2008 met ketting. Deze begon al vrij snel olie te drinken (liter per 3000km).
Toen kreeg ik het advies om deze olie te kopen van een vriend, daar heb ik probleemloos nog 7 jaar mee gereden.
I noticed that the engine was way smoother (way less vibration) when lightly lugging the gears at 1600 - 1800 rpm on the Valvoline vs the stock oil or Castrol Magnatec. The Valvoline did the same on my 2022 BRZ vs the stock oil and the dealership bulk Magnatec. I also tried Shell oil and the Valvoline is by far the smoothest below 2000 rpm. Almost no oil burnt or evaporated in between oil changes on both cars (less than 100ml per 3k miles) with the Valvoline Advanced.
Prima spul. Jarenlang gebruikt voor mijn getz.
Valvoline.. niets mis mee, doe het in mn A4 B6 en Golf 4 Gti... Draait er echt niet minder om... Ook van de action.
NOW, my last oil change I did 2 weeks ago I used Valvoline Restore & Protect after using various Mobil1 & Valvoline high mileage oils. And so far after checking my dipstick today the oil level is still at the top of the fill line. I’m not guaranteeing that this oil is in fact revolutionary but I have noticed significant loss in oil consumption & a more quiet engine bay.
Valvoline full synthetic with max life was the best oil I tested based on blackstone results.
I'll use my Valvoline happily.
I have run the 5w-40 and stuff every day here in utah and it works fine on 300-400 bhp setups. If you are going to the strip or the dyno and going for probably 450-500 crank I would probably grab that gold top mobil one 15w-50. I would also use that for any road racing where the engine oil gets really thinned out from heat. It's also cheap at wal mart I believe. Over at 575-600 bhp we lost a main bearing when doing endurance testing on valve springs with the 5w-40 and very reasonable oil temps. It didn't really catastrophically fail, but was on it's way to it when we tore it down. Have since switched to VR1 20w-50, and the problem so far appears to be cured. That stuff will carry way more load then the thinner oils- the catch is that it's absolute sludge until warmed up. Yet another one of the barriers to extreme power "street" cars I suppose. I'm keeping an eye on it to see if we have a solution. If that doesn't fix it, the problem may be aeration of the oil- we were running at 7500+ for pretty long periods. So basically now the oiling system is a major focus of R&D for us. The oil pressure was never out of the ordinary- although it does start falling once past about 7500 rpms which is also not great.
Write your review
Help others - share your experience with this part.
Voted AGAINST engine oil RAVENOL on the rating page
The brake pads NIPPARTS got the first review!
The brake discs Hella got the first review!
The brake discs OEM Suzuki got the first review!
For tires OEM Toyota already 25 reviews.
For tires IRONMAN already 25 reviews.
For starter motor OEM Volkswagen already 25 reviews.
In the rating best ignition coil already 13 brands participate!
In the rating best fuel pump already 5 brands participate!
In the rating best turbocharger already 4 brands participate!
In the auto rating headlights for Volkswagen Golf already 5 brands participate!
In the auto rating brake pads for Mazda 5 already 10 brands participate!
In the auto rating brake pads for BMW M2 already 5 brands participate!
Voted AGAINST engine oil RED LINE on the rating page
Voted AGAINST engine oil PENNZOIL on the rating page
