Ignition coil MSD or BERU
I personally dislike HUCO brand which it had, I replaced mine with a BERU coil, still going strong since '97.
My coil is a Beru and pretty much brand new.
many thanks to this diy i just successfully replaced my unbranded made in italy POS coil with a brand new one from beru. gosh, as soon as i put that in and started the car it didnt start so rough. what a small but significant change, kudos and thanks!
after you check the dwell and all wiring looks good, it may help to switch to a different coil like the MSD Blaster 3.
The stock ignition coil on our Mk3 Jetta -- which we've had since it was new in 1996 -- just went out about two years ago. Typical crack causing the engine to die when going through puddles. I considered replacing it was an inexpensive Meyle coil. Decided against it, because while Meyle is a German company, their ignition coil is made in China, and I'd heard some bad things. Figuring the OEM VW coil really is over-priced, I finally decided on a Beru coil. It is made in Germany, and so far no problems.
I've had similar spark plugs fouling up issue with the G60 turbo swap in my caddy. After checking all the stuff you mentioned, I upgraded to an MSD Blaster 2 coil and NGK plugs with a wider gap (0.030). So far so good, running on all four cylinders now.
I am currently using the cheaper version because I just never put in the 'thought-to-be-bad' pack back in [btw, it was an injector so both packs were perfectly fine]. With that in mind, I cannot say there was any quality increase because it was never my CP to begin with so it was still misfiring even with the $350 BERU. But, what they did both do is act exactly the same when I put them both in. I have not had any problems thus far with the cheaper one, and it feels about the exact same quality as the beru brand.
I had my old OE coilpack off, replaced with the new BERU unit. I had everything put back together, started her up, and she was running okay, but still far from perfect.
Has anyone ever experienced an odd electrical type humming sound eminating from the front of the dash after putting in a new ignition coil??? I put in a Beru Coil and I could swear I now hear a faint hum that wasn't there prior to installing the new one. It kind of sounds like the radio with the sound way low when it picks up engine frequencies (but I know it's not that). It definitely sounds electrical and not mechanical and I've noticed the hum increases in frequency when I increase the rpm's. Do coils even make any noise??? Thanks.
I ended up with this MSD when I bought Tim's motor and the MSD finally crapped out after about a year of me driving with it. In running a coilpack, I notice no tangible difference between the two. Yes, the MSD looks really, really cool...but if you ain't worried about looking pretty, spend your money elsewhere.
Write your review
Help others - share your experience with this part.