Oil filter Mahle or STP
I'm currently running a Mahle OC75 filter, its easier to get from Amazon, and it is only slightly longer. I go back and forth between 15W50 in the winter and 20W50 in the warmer months. The 15W is synthetic and 20W isn't.
I used to get cheap Mahle oil filters for my K100 on Amazon for $15 or so
I use Mahle filters in both my VR6 and 2.5 from first oil change. No issues.
Personally, I just use whatever is cheapest, as long as it is rated decently by the API. The way I see it, oil is really just oil. It's slick, it lubricates, it has whatever weight and viscosity it says on the bottle. The API makes sure it reaches those standards along with any claims on the bottle, so I'm comfortable saving money there. I've never had any issues in my many tens of thousands of miles of ownership and there's no sludge buildup or any worrying deposits inside the motor that I've seen when I've worked on it.
Mahle. Best pleat design I’ve seen and according to Volvo, their primary reason they selected Mahle over MANN or Hengst.
Engine oil: I use 10w40 in my rebuilt ABA/2H. No issues. I prefer Mahle filters.
I am running an STP filter on it.
I have several VW/Audi cars and I use Mahle oil filters most of the time. I've heard some horror stories about other aftermarket filters causing some problems, particularly on the water cooled Vanagons (I have one). Mahle and Mann seem like the best option.
Putting together a cart on RockAuto.com Ignition : Distributor Cap - BOSCH Part # 03214 Ignition : Distributor Rotor - BOSCH Part # 04038 Ignition : Spark Plug Wire Set - BOSCH Part # 09273 OE Engine : Valve Cover Gasket - BECK/ARNLEY Part # 0361431 High Temp Cork/Rubber Engine : Timing Belt - BECK/ARNLEY Part # 0260176 121 teeth; Trapezoidal tooth profile; Neoprene construction for durability. Ignition : Spark Plug - BOSCH Part # 7900 {#7500, W7DC, WR7DTC} SUPER PLUS Fuel/Air : Air Filter - MANN Part # C2860 Fuel/Air : Fuel Filter - BECK/ARNLEY Part # 0430798 Engine : Oil Filter - MAHLE Part # OC108 Am I missing anything?
Put some normal oil and an STP filter in it. Got it all back together, runs great. Ran around the block, noticed the oil light flashed when over 2500 RPM . Back in the drive way, let it cool down. This morning, put motor flush in, idle it for 5 minutes per instructions, and drained the oil and changed the filter. Looking at the filter, it seems collapsed. It doesn't seem horribly clogged - there is a bit of silt in the crevices, but that was expected. Is it just because of the cheap filter?
Write your review
Help others - share your experience with this part.