Oil filter Mann or OEM Volkswagen
If zero rust, go for it. Mann, Mahle, or Kayser filter.
Used some Rowe VW 508/509.00 0W20 oil plus Mann filter.
I use 10W/60 and change it out ever 5k. I also use MANN W 719/30 oil filters. They are designed for synthetic oils and longer oil changes.
Mann filter snapped firmly into place and felt really solidly built. Will be using this one from now on.
Can’t tighten these caps by hand as they need to be torqued down to spec. Also use OE Mann filters and gaskets as they will not leak.
Use a Mann oil filter and torque it properly... they shouldn't leak
I can recommend MANN filters. I've cut one open recently. They have a full metal construction, even the inner tube isn't plastic.
I recommend you use your favorite VW 502 00 spec motor oil with an OEM Mann oil filter and change them at 5K miles. My 2008 Rabbit with the 2.5 CBTA engine has 153K miles so far and I can barely hear it idle.
I just did a oil change and with EFL 5W40 and use the BIG Mann filter like usuall and realise that the oil as already become a bit blackish...
The five has been known to not fill up with oil upon starting due to the one way valve At the top to create a bubble. It is rare but has happened. The five was always difficult to fill because you had to fill the small holes instead of the center.
Write your review
Help others - share your experience with this part.