Oil filter STP or OEM Volkswagen
I used the bigger passat 1.8t filters on my DD 2000 jetta with mobil 1 0w40 for over 100k in 4.5 years (135k total on vehicle) and when that car was totalled in a flood, the motor was tight and flawless...
Oil filter/housing and the Crank Position Sensor are pretty common leak points. The CPS leak on my own car was like this phantom leak I just couldn't find until a shop fixed it for me.
my 5k service on Friday, w/oil change, cost $54 w/filter (I supplied the oil since the dealer didn't stock it, from http://www.1stvwparts.com / for $6.80/ltr.).
I used the oil that is VW507.00 spec and can be bought at the VW dealer (approx retail cost is $7.00 per liter) Oil change capacity is approximately 13 liters. Oil filter part number is shown. I ordered the oil filter cap removal tool from http://www.samstagsales.com for $67.00 plus shipping.
yeah the oem ones arent (THAT) expensive and they work great.
Pros - They have a real oil filter, the case is sturdier, they can handle more power and bigger displacements, they last forever without machining, the stock heads were pretty solid. Cons - They are harder to work on since there is more to assemble and disassemble, parts are slightly more expensive (not much though), they are harder to find, the different year engines had many variations so you have to know which one you've got.
I have it, and the car is alot more smooth. Good filter.
Well she ran out of free oil changes at VW and so I went online to research which oil is recommended to use in the VW and found that just to buy the filter and enough oil that meets the VW specification requirements would cost close to $80. I can buy the stuff to do an oil change in the Lexus for less than $30
When I first purchased my VW, I could drive it how ever far in whatever temperature and wouldn't get any beeps or blinks. I brought it to a friend to do an oil change and he threw 5W30 in it with a STP oil filter. After that oil change, if the car was driven too long the light would blink and the ding would chime. If you revved to about 2300~ RPM, the noises and blinking would stop. I guess that is a temporary fix, but all I did was change the oil to 10W30 and haven't gotten any noises yet. I guess 5W30 is too thin and can't build up enough oil pressure? I'm not too sure.
Me too, so I went back to the stock size filter and the issue improved.
Write your review
Help others - share your experience with this part.