ive been using NGK plugs in everything from my motorcycles, to cars, to outboard motors, whatever.. ive never had a problem with them.
BKR7E at .028 on a 2871R. I change them every oil change so basically ever 3k miles. For 9 bucks you can't go wrong. It's like instant power back. I have noticed though sometimes when I change them that the gap has opened up.
recently put in some NGK BKR7Es and so far so good, gapped at .026" (or .027 i can't remember and im not taking them out to check )... ran it up to 20psi and it seemed to run harder
I use BKR7E .022, I change them every 3000 miles...until now no issues..and they are cheap
brk7e's are excellent...2.5 years with no issues on this particular plug(not the same set obviously). .025 is a good gap, alot run .028..but i have found. 025 to be better,especially for frequent WOT driving in the heat here.
first set i used were NGK R5671A-7 non-resistor plugs gapped at .025\" had ran multiple sets of these for well over 20k miles with zero issues.
I have now used those plugs of mine up to 35psi so far with no issues.
Same exact plugs I use they haven't given me any issues I have em gapped to .022 and no misfires at 31psi, the car made over 600whp with no problems with these plugs, and they cost about $3 a plug.
Napa usualy is the only parts store around me that carries NGK in stock
I changed over to the BKR7E model to see how they worked. I wasn't impressed because after that the RPMs on my tach wouldn't stay steady at idle.
Write your review
Help others - share your experience with this part.