Spark plug NGK or BERU
Mine are either ACDelco or NGK, cant remember which. Either way no complaints.
I went ahead and replaced all 4 coil packs and plugs as well as the PCV valve. Since I have to order parts, it seemed faster than checking the plugs and swapping coil packs, as well as good insurance, since the coil packs and PCV valve were (over)due for replacement anyway. It took about an hour without rushing. Took about a 30-minute test drive, highway and town, and the engine's running smoothly. Ran a scan when I got home, and no new fault codes, so I cleared them all out and the check engine light went out.
I have always used double plat or ngk laser iridium with no issues in my 2.5.
I ran stock plugs for a while and they got chewed up fast. On NGks now and even pushing 29 psi they keep the gap well.
I run the IS38 FBO and beat the crap out of my car and use stock heat-range Rutheniums.
Spark plugs. NGK 4 lyfe
NGK spark plugs are preferred in rotary engine (RE) Mazdas and Nippondenso is the only acceptable substitute that I ever found. We dealership technicians, always found it remarkable how a set of Champion or AC spark plugs could instantly cripple a rotary powered Mazda.
My 2017 Jetta SEL with LFER7BHX 9512 plugs starts/runs fine at 50076 miles, 0-100 degrees F.
The only thing I noticed when it was extremely hot and humid my car was slow in accelerating.
Recently i changed my spark plugs DENSO IRIDIUM IK22 with NGK BKR7E gapped at 0.28inch-0,70mm. The car became very laggy, the throttle response got worse, much more turbo lag and major lost of power. Also im going back with the Densos.
Write your review
Help others - share your experience with this part.