Consider Project Mu Club Racers. They’re not the most aggressive pads but hold up decently well on track depending on your pace and are surprisingly streetable.
Pros: decent on track, surprisingly streetable
Cons: not most aggressive
Reviews of Project Mu parts For Business
Average Rating
?
The manufacturer's average rating is calculated based on ratings of all its spare parts. It determines the place in the manufacturer ranking
4.2
Manufacturer Ranking
#55
22
Spare Parts
1
Country
Japan
Website
project-mu.co.jp
Spare Parts
Comparisons
Pretty happy with my PMU 999s. They’re a step down from csgs but so much cheaper even with tariffs on imports.
Pros: happy with performance
Cons: step down from csgs
IMO the best are Project MU-HC+. in my Megane RS I could treat the HC+ as a track pad and go all-out for a full session, they'd just wear pretty fast at high temps
Pros: treat as track pad, full session
Cons: wear pretty fast
Vehicle:
Renault Megane
The pads seem to last forever on the street, and work really well on the track/ when warm
Pros: long lasting, good on track/warm
Vehicle:
Honda Civic
Depends what you're after. If just street with some spirited driving, smething like pmu hc+ or ns400 works. I do track work and used to run hc800s, but got hc+ thinking they are the same. Only 600c rated instead. But, good cold performance, and extra good performance hot. So, they don't wear out super quickly while daily driving. Got quite a lot of track days and driving out of my original hc800s with t3 rotors. But, they are harder to find. Need to get the shape from pmus website, and then find somebody that stocks them. Rhd japan may do
Pros: good cold performance, good hot performance
Cons: harder to find
Vehicle:
Honda Civic
I really liked Project Mu Club Racers as a "streetable-ish" track pad. They were fairly tolerable on the street as long as they were bedded in. They occasionally squeal when coming to a stop once below 15mph.
Pros: tolerable on street
Cons: occasional squeal
Higher-temp and higher-mu pads (Project Mu HC+R3) + braided brake lines + DOT 4 fluid for me. Slotted fronts, blank rears.
Pros: higher temp, higher mu
Vehicle:
Subaru
Red stuff are absolutely NOT track worthy. Will fade in like 1 lap. Any pads advertised as "low dust" tend to fade pretty fast. Yellow might be ok but I think they're still more of a performance street pad. Project MU HC+ are a good streetable track pad, maybe the best, use them on my Megane RS, no trouble with 20 mins sessions on high speed tracks and trackday tyres (Yokohama AD09). A little squeel at low speed on track but quiet enough to live with IMO.
Pros: streetable, good for track
Cons: red stuff fade fast
Vehicle:
Renault Megane
Project MU HC+ pads. These have a higher operating temp range than Ferodo DS2500 and are perfectly streetable too. I get very minor squeal when coming to a stop if it's been a while since they were used hard. they also have great braking feel IMO, nice and sharp, and perfectly controllable. I use them on a Renault Megane RS 280 Cup, I've used them on track with semi-slicks (AD09s) and they held up great in 15 min sessions. Some minor vibration after the day but that fades away with use (or another hard besdding session). Do not recommend Ferodo DS2500 especially with semi slicks. Might be ok for your first day if you're slow, but you'll almost certainly cook them on your second and get deposits on your rotors. Great performance pads or the street though. On my car I only use them on the front, rears are stock.
Pros: streetable, great braking feel
Cons: minor squeal, minor vibration
Vehicle:
Renault Megane
I found Project Mu Club Racers to be decently streetable for a track pad. They do squeal a bit at less than 25 but are tolerable as long as they’re bedded in and you’re giving a decent amount of threshold pressure.
Pros: decently streetable
Cons: squeal a bit
Vehicle:
Honda S2000
Write your review
Help others - share your experience with this part.
Voted AGAINST engine oil RAVENOL on the rating page
The brake pads NIPPARTS got the first review!
The brake discs Hella got the first review!
The brake discs PILENGA got the first review!
For cabin filter Fram already 25 reviews.
For battery Energizer already 25 reviews.
For battery Deka already 50 reviews.
In the rating best shock absorbers already 13 brands participate!
In the rating best windshield already 14 brands participate!
In the rating best head gasket already 3 brands participate!
In the auto rating windshield for Subaru Outback already 5 brands participate!
In the auto rating headlights for Volkswagen Golf already 5 brands participate!
In the auto rating brake pads for Mazda 5 already 10 brands participate!
Voted AGAINST engine oil RED LINE on the rating page
Voted AGAINST engine oil PENNZOIL on the rating page
Owner reviews of Project Mu products
The Project Mu brand is registered in Japan. Official website: https://www.project-mu.co.jp/ja/ .
In March 2026, PartReview recorded 22 reviews across 1 part by Project Mu. Average rating — 4.2 out of 5.
Project Mu is in the PartReview manufacturers ranking, currently at position 55. Over the last 30 days it dropped by 0 points.
Popular Project Mu parts
The most popular Project Mu products on PartReview:
- Brake pads Project Mu - 22 reviews. PR Score — 94, average rating — 4.2.
Most owner reviews about Project Mu parts are collected on these pages.
Top-rated Project Mu parts
Project Mu achieved top positions in these PartReview part rankings:
- Best brake pads — ranked 21 among 44 manufacturers. Received 13014 votes.
Comparisons of Project Mu parts
The most interesting comparisons of Project Mu with other manufacturers help you see which is better: