Instead of replacing my brakes and rotors with OEM, I went with Akebonos (ceramic brake pads) and it’s shocking how much bite there is. Like I have to raise up my brake pedal at every red light or else I lurch forward. Also did a brake fluid flush.
If you want comfort, use an OE supplier (TRW, Textar, pagid), if you want more performance at the cost of some added noise/dust, Ferodo/hawk/EBC
Did mine a couple months ago. They feel good and stop well. Decent price. No noise.. would do it again. The hardware wasnt great and ended up reusing the oem clips.
I bought a well maintained 2014 Mazda 3 hatchback with 60k miles two years ago for $8500. I’ve done rear and front brakes, as well as a rear wheel bearing in that time.
If you’re going to track it. I’d get the STI just for the better brakes alone.
Slap some EBC RedStuff or YellowStuff Pads on & you'll change your mind quickly.
I had an 850R. It was great. However, two issues: the brakes were shit when they are hot (scarily so: I had a real squeaky bum moment when I tried to brake for a roundabout when I had be driving in an, er, *spirited* fashion*.* I mentioned this to a traffic cop and he said they always upgraded the brakes on 850s). However, unless you drive like a lunatic, I wouldn't have thought this was a major issue.
Textar makes good pads but they get brake dust everywhere. They are currently the stock ones on my 23 m40i.
A couple of months after purchase the breaks starting squeeking and a 1 1/2 years later they haven’t stopped. I have had the front ones replaced but I keep getting told it is due to no copper in the break pads anymore - I call BS to that. I also had to get a faulty sensor replaced for the front end because it was causing my car to abruptly stop when I attempted to pull off from a parked position. It was thinking something was in front of me so the front end collision thing was kicking in. I’ve also had to get the fuel injectors replaced because they went bad while in a road trip this summer. Luckily we were almost back home instead 800 miles away still. Currently waiting for rear breaks to come in so those can be replaced to hopefully stop this squeak.
Bought a 2012 Toyota Sequoia from Heritage Motors on Shore Drive with a fresh inspection on it, So I personally figured it'd be solid, as Sequoia's are known to be pretty dependable. Not only was it a lemon/some huge issues, but the brakes were slapped together with bubble gum and hopes and prayers. The brake pad on the passenger side was installed backwards, which I was shocked it didn't make noise on the test drive
Write your review about brake pads
Help others - share your experience with this part.
Voted AGAINST engine oil RAVENOL on the rating page
The brake pads NIPPARTS got the first review!
The brake discs Hella got the first review!
The brake discs OEM Suzuki got the first review!
For tires OEM Toyota already 25 reviews.
For tires IRONMAN already 25 reviews.
For starter motor OEM Volkswagen already 25 reviews.
In the rating best ignition coil already 13 brands participate!
In the rating best fuel pump already 5 brands participate!
In the rating best turbocharger already 4 brands participate!
In the auto rating headlights for Volkswagen Golf already 5 brands participate!
In the auto rating brake pads for Mazda 5 already 10 brands participate!
In the auto rating brake pads for BMW M2 already 5 brands participate!
Voted AGAINST engine oil RED LINE on the rating page
Voted AGAINST engine oil PENNZOIL on the rating page
