I had my V60t6 2020 done for 800$ with Zimmerman rotors and Hawk pads (high performance). The job was done by 2 technicians within 1h.
Solid, Zinc coated Zimmermann with Red Stuff pads. I'm stage 1 and push my car a bit occasionally and have never had any issues stopping when I want to.
I replaced my previous rotors with Zimmerman ones and they also had this notch so don’t worry about it as it’s normal.
I used Zimmerman rotors and ATE ceramic pads all purchased from fcpeuro.com. With stock pads I could wash the car and within two days they would be brown from brake dust. Now I can go weeks before I start to notice that there may be a little dust.
With the ceramic pads I cannot tell a difference in braking, I have almost no brake dust, and the rotors still look like new.
I used both before Zimmerman is good and cheap. Akebento are good too but hard to find and more expense. I practically used all brake pads and rotors over the 13 years I own the RRS. I would recommend using cermpads.
Running DBA 4000 SX rotors f/r on my '05. Stock calipers.
Zimmerman rotors and Hawk HPS pads. Rotors are not drilled or slotted. The car stops on a dime and just saved me on the highway yesterday. This was the first modification I did and I'm glad I did it.
Zimmerman makes great rotors.
I have the zimmermans, and I've heard numerous people tell me they've seen and heard of them cracking under heavy heated use. It kinda worries me a little, but they've been solid so far, and I've yet to really roast them... Honnestly if I were to do it again, I would probably go with the brembos even though they may be a little more expensive. whats more important to stopping, is pads. The difference between the stopping power and feel of different pads varries greatly. I've had some heavy carbon kevlar pads that took a long while to warm up but once they were warm grabbed really well, but they were kinda hard for regular street driving. I've used stock pads which pretty much suck but last forever, and I've used some softer sport street pads that wear and dust a little more, but stop far supperior to oters for regular street driving. I've yet to push them to the point of fade, but we'll see where that goes once I've got the suspension and bleeding sorted
Tbh drilled Zimmermann Discs are imho Junk. They use OEM Discs. Had so many Problems with Vibrations, warped Discs and so on.
Write your review
Help others - share your experience with this part.
Brake discs Zimmermann or POWER STOP
Brake discs Brembo or Zimmermann
Brake discs Brembo or POWER STOP
Brake discs Zimmermann or Centric
Brake discs Zimmermann or STOPTECH
Brake discs Zimmermann or OEM Volkswagen
Brake discs Zimmermann or EBC
Brake discs Zimmermann or Raybestos
Show allVoted AGAINST engine oil RAVENOL on the rating page
The brake pads OEM Alfa Romeo got the first review!
The tires OEM Fiat got the first review!
The ABS unit OEM FORD got the first review!
For oil additives LIQUI MOLY already 25 reviews.
For tires GISLAVED already 25 reviews.
In the rating best cabin filter already 13 brands participate!
In the rating best shock absorbers already 13 brands participate!
In the rating best fuel pump already 5 brands participate!
In the auto rating shock absorbers for Ford Ranger already 20 brands participate!
In the auto rating headlights for Volkswagen Golf already 5 brands participate!
In the auto rating tires for Toyota Corolla already 50 brands participate!
For cabin filter Fram already 25 reviews.
Voted AGAINST engine oil RED LINE on the rating page
Voted AGAINST engine oil PENNZOIL on the rating page
