Amazingly, after 24.5K miles, i was down to 2mm on my front pads. I do live in Seattle and on a steep hill and drive with a heavier foot, so go figure I used up my brakes. Decided to put in Brembo ceramic pads and rotors for fun. Braking is different from stock. It’s definitely strong, yet, the initial bite isn’t as aggressive as OEM. I’ve grown to like this as it lets me be more precise with my braking. I can simply slow down lightly without drama, but push more and the brakes grab strongly and uniformly. They just feel more engineered.
I ride a Gt535 it has no ABS no rider modes none of those fancy electronics, but its got Brembo sintered brakes. They work flawlessly and bring the heavy machine to a stop.
2018 elantra sel, original owner. Mostly city driving - 8k miles/year. 47k miles now. Just wear and tear issues - front brake pads and rotor at 35k.
Never scrimp on brake pads. However, personally I never buy OEM pads. Manufacturers just brand a brake manufacturers brakes and charge a premium for putting their logo on it. Get the part number and do your research to identify what brand the OEM part is. You should save money for the same brake pad. Otherwise, you could also save money by buying aftermarket pads by quality brands. Brembo, EBC, black diamond. You may find they are available, cheaper and better quality. Worth a look.
Had my Fortuner front pads replaced, Brembo Prime Ceramic Pads: 3500 lang kasama na install sa Jiga.
You can save on the brake pad prices, either buy the original parts from a shop in sharjah for much less or install Brembo Brake pads which also cost much less and are also very good quality.
I swapped front pads with a 13mm socket, hammer and drift pin. In about 30 mins in my driveway. $210, parts delivered from Amazon. Took the opportunity to scrub out calibers free from all the caked on brake dust. Cleaned the inside of the wheels while I was there. Dealership wanted $787 just for the front pads and quoted more than $1000 installed. Easiest job ever and saved $500-$700.
If you DIY and have the tools I did front and rear brakes on my 340i with brembos for $725ish
I have the same problem with brembo pads but only when the brakes are cold.The car is breaking good and the noise only last a few minutes. So its ok for me.
My brakes are starting to squeak so I contacted my local Subaru dealership to get quoted on my front brakes as the rear are still in good condition. They quoted me for $1200 to replace the brembo pads and rotors as they insisted that drilled rotors need to be replaced EVERY TIME you change the brake pads as they cannot be resurfaced.
Write your review
Help others - share your experience with this part.
Voted AGAINST engine oil RAVENOL on the rating page
The brake pads NIPPARTS got the first review!
The brake discs Hella got the first review!
The brake discs OEM Suzuki got the first review!
For tires OEM Toyota already 25 reviews.
For tires IRONMAN already 25 reviews.
For starter motor OEM Volkswagen already 25 reviews.
In the rating best ignition coil already 13 brands participate!
In the rating best fuel pump already 5 brands participate!
In the rating best turbocharger already 4 brands participate!
In the auto rating headlights for Volkswagen Golf already 5 brands participate!
In the auto rating brake pads for Mazda 5 already 10 brands participate!
In the auto rating brake pads for BMW M2 already 5 brands participate!
Voted AGAINST engine oil RED LINE on the rating page
Voted AGAINST engine oil PENNZOIL on the rating page
