Brake pads Carbotech or Hawk Performance
I got my rotors turned and threw some hawks in it. HPS I think. No issues and they have good bite.
I run non-oem pads on my t6 but that’s because I like more initial bite when I step on the brakes. I use Hawk street performance pads. They definitely make more dust and sometimes more noise than OE pads.
I've been to 20 track events to this day I'm still running OEM calipers. Just carbotech pads. You don't need a big brake kit at all. The oem cracks because of improper cooldown. I learned that after a session to take my cooldown lap seriously and ever since then i stopped cracking AutoZone rotors
I ran stock rotors for a long time with carbotech xp10/8, front brake ducts, stainless lines, and Motul 660. The XP10/8 + ducts was sufficient for 20min session the tracks I drive.
I thought I had a bleed/bore issue because my hydro wouldn't lock up under full force, turns out the stock style break pads were not sufficient to lock it up (even though stock pads work to lock rear wheels on foot brake). I switched over to Hawk HP+ pads and that did the trick for me.
Running Hawk DTC 30s on a Mustang (3800 lbs with me) both front and rear. I brake hard and the car is heavy. The pads don't glaze nor fade. Wear is OK.
I'm using carbotech xp8 on my 3800 pound sedan. They've survived 6 days at the track plus occasional driving around town for a year.
I daily DTC-60s and they're surprisingly not that noisy.
I have Hawk HP+ on my NA, and while the bite is good, the brake dust is pretty significant
Should’ve gone with EBC! Tried Hawk hps blues and could not go more than 500 miles before taking them off and replacing them with EBC yellows again. The noise was horrible.
Write your review
Help others - share your experience with this part.