Brake pads DBA or Hawk Performance
I’d used hawk ceramic pads especially since you don’t plan on tracking the car. Low dust and will keep the wheels looking good between washes
They don't even squeal as much any more
I’m at 155,000km and I’m about to replace my OEM rotors and pads this month with DBA slotted rotors + DBA XP/SP brake pads. I do 75% highway driving and I never have to brake hard.
Hawk DTC-60 pads are the best value performance pads I found. Stock blank rotors are fine, I upgraded to a 335i sport caliper set and its been more than sufficient for many track days
EBC for occasional track and daily pad. HAWK DCT60 is what I’m running. Stops so good!!
I ran hawk hp+ pads last year before starting my first track season ever. After 7-8 track days, driving to and from track, and the occasional fun drive on the street. About 10k miles later, I swapped them for fresh hp+ pads for this year. Comparing the old vs fresh pads, I used about 50% of the pad.
I use Zimmerman rotors and Hawk HPS pads on all my Audis.
Loved my hawk track pads in the front on power stop rotors. I tried the EBC as well but only had them for a few thousand miles before I traded it in.
I've used hawk hp+ all last year and my first event of this year; they do serve as a pretty good intermediate pad, if I were you I'd go after something similar to it or slightly more track-oriented, but as I understand it the "HPS" pads are not designed for track use, more of just a capable street pad. The HP+ feel great for street driving, but be aware that they do create a fuckton of dust, and oftentimes they squeal like a school bus as you come to a stop. On track, I'd say they do fine for a beginner. I tend to brake on the early side and not as hard as I could, it's an area where I could certainly improve. I have noticed some brake fade at my most recent event, and for that reason I will be installing some G-loc r8's tomorrow, with a backup set of R12's for the front.
I used these for a track day and the dust melted/hardened onto my wheels and spent days scrubbing with different wheel cleaners and chiseling it off.
Write your review
Help others - share your experience with this part.