Brake pads EBC or Ferodo
I used the HH pads for several years on my GSXR600. Eventually I started cooking the HH pads as my pace came up. I would get some hot spotting on the rotors where the pad material was melting and leaving itself on the rotor unevenly. When this happens your rotors will need to be media blasted or replaced to get them smooth again. A lot of it depends on your style and pace, but for the peace of mind I would recommend going for the better pads. They have a very similar feel but the EPFA is a little more consistent with less fade.
I used my stock tires 15k mi + 6 track days + 2 driver skill courses - brake fluid (Motul RBF600) - brake pads (I used Ferodo DS2500 on the fronts)
If I have to stand on the brakes they certainly STOP better than the OEM brakes. It's a very good improvement in brake feel as well. The car stops straight now instead of wondering a bit side to side.
Cut to 2019 and I added Ferodo Racing 2500 pads to the front and they worked GREAT at NJMSP, still with the EBC rears.
EBC Red. I put them on my GTI and liked the low dust but loved the feel of the brakes. I thought the stock pads came on quite strong, but didn't get that much stronger as I pushed harder on the pedal. The reds are very linear without any hint of initial grabbiness.
EBC red. You only need to do the fronts.
I installed EBC Redstuff pads on stock rotors... Well pretty happy with that so far. I just finished the break-in period. Better initial bite than OEM TRW pads. And little more braking power overall.
I've been running EBC Redstuff for 5+ years now, and while I haven't looked at the pad clips in over a year I don't recall them being any different than OEM. Performance has been good, and they're less dusty than the original pads.
I have the epfa pads on my ‘17 r6. More power than my stock pads but not crazy in bite or max power imo. I’m a mid pack b group rider at best so yrmv. However, important to note, I took a trip to deals gap this fall and crossed the skyway in a cold light rain (45°f?) and the pads were not happy. First time I grabbed the lever and they had 15% of the power I was expecting, and took a solid 2 secs to build enough heat to do anything.
Closest were the EBC Yellows, but the fronts crumbled on a hot day at a fast track (VIR.)
Write your review
Help others - share your experience with this part.