I used the HH pads for several years on my GSXR600. Eventually I started cooking the HH pads as my pace came up. I would get some hot spotting on the rotors where the pad material was melting and leaving itself on the rotor unevenly. When this happens your rotors will need to be media blasted or replaced to get them smooth again. A lot of it depends on your style and pace, but for the peace of mind I would recommend going for the better pads. They have a very similar feel but the EPFA is a little more consistent with less fade.
If I have to stand on the brakes they certainly STOP better than the OEM brakes. It's a very good improvement in brake feel as well. The car stops straight now instead of wondering a bit side to side.
EBC Red. I put them on my GTI and liked the low dust but loved the feel of the brakes. I thought the stock pads came on quite strong, but didn't get that much stronger as I pushed harder on the pedal. The reds are very linear without any hint of initial grabbiness.
EBC red. You only need to do the fronts.
I installed EBC Redstuff pads on stock rotors... Well pretty happy with that so far. I just finished the break-in period. Better initial bite than OEM TRW pads. And little more braking power overall.
I've been running EBC Redstuff for 5+ years now, and while I haven't looked at the pad clips in over a year I don't recall them being any different than OEM. Performance has been good, and they're less dusty than the original pads.
I got them replaced with the EBC YellowStuff and the brakes feel much better at the track now. They still get a bit soft once it's hot, but this may be due to the brake lines expanding?
ebc yellows are great, but you need to bed them in with a hard stop from 180 kmph, not something you want to get caught doing.
I put about 65 minutes of track time on my EBC Yellows. The seemed to hold up Okay. I sent some pictures to EBC they said they got really hot and I should consider brake cooling options.
The negatives with EBC Yellow stuff is that they produce a HUGE amount of dust, and eat through rotors quickly. I had them on my wifes CX-9 with a set of their drilled and slotted rotors, they were horrible! The rotors had a vibration at anything over 45mph, and the dust they created was ridiculous.
Write your review
Help others - share your experience with this part.
Voted AGAINST engine oil RAVENOL on the rating page
The brake pads NIPPARTS got the first review!
The brake discs Hella got the first review!
The brake discs OEM Suzuki got the first review!
For tires OEM Toyota already 25 reviews.
For tires IRONMAN already 25 reviews.
For starter motor OEM Volkswagen already 25 reviews.
In the rating best ignition coil already 13 brands participate!
In the rating best fuel pump already 5 brands participate!
In the rating best turbocharger already 4 brands participate!
In the auto rating headlights for Volkswagen Golf already 5 brands participate!
In the auto rating brake pads for Mazda 5 already 10 brands participate!
In the auto rating brake pads for BMW M2 already 5 brands participate!
Voted AGAINST engine oil RED LINE on the rating page
Voted AGAINST engine oil PENNZOIL on the rating page
