Very happy with the setup. I’ve failed to get it to fade on either mountain roads or the track, but never done long stints, maybe 20 min max. The DS2500s are nice because you can swap them out for other more or less aggressive Ferodo compounds without issue.
I ran Hawk pads on cars in the past and hated them, can’t say enough good things about the Ferodos.
I would recommend first to switch fluid for Castrol SRF then switch to Ferodo DS1.11 brake pads exclusively for track use and DS2500 for daily/canyon carving.The beauty of Ferodo brake pads is that it not needed to re-bedding your pads when switching compounds as long as you stay within the Ferodo family.DS1.11 are endurance pads that love to operate in very high temperatures which might not require cooling ducts.
Ether Motul RBF 600 or Endless RF650 brake fluid is a good options. As far as pads go Ferodo DS2500 is a great pad for street/track. It has relatively low dust and noise levels compared to other track pads, yet still has moderately high bite and solid fade resistance of a track pad.
I had a 172,Clio with ferodo DS2500 pads all round and brembo high carbon vented front discs and solid rear discs.
I didn't touch the calipers, I thought the calipers were ATE, but could be TRW. I only changed out rears at this time, fronts are still the same. The pads are TRW ceramic something or others that came with zimmerman rotors in the cheapish FCP kit.
I run the Ferodo DS2500 which would probably meet your criteria. Fair warning though - they make noise, especially in the fixed Brembo calipers. You have to regrease them every few months.
Buy Ferodo DS2500 brake pads then buy rotors according to your budget, forget about drilled rotors if anything go with slotted and if within your budget get two piece rotors in order to save unsprung weight.
Ferodo Ds2500 as brake pads or Ebc Yellostuff (a tad cheaper). Avoid drilled or grooved rotors because kinda useless. Just a good oem equivalent like Brembo (if in you market have CTF go for it)
They look about par for an economy, aftermarket brake pad. I use TRW on my beaters pretty often. Mine often don't come wrapped in anything other than a rubber band. They aren't OEM quality, but for 20 bucks a pair...I'll deal with it and have never had an issue.
I put some Ferodo DS2500s for a HPDE event at the end of July and noticed discoloration and crumbling on the edges. Swapped them out with PFC08s for this weekend’s HPDE and noticed chunks of material missing from the inner of the pad.
Write your review
Help others - share your experience with this part.
Voted AGAINST engine oil RAVENOL on the rating page
The brake pads OEM Alfa Romeo got the first review!
The brake caliper OEM BMW got the first review!
The brake pads OEM Infiniti got the first review!
For wiper blades PIAA already 100 reviews.
For battery Energizer already 25 reviews.
In the rating best water pump already 12 brands participate!
In the rating best timing belt already 13 brands participate!
In the rating best head gasket already 3 brands participate!
In the auto rating oil filter for Volkswagen Passat already 5 brands participate!
In the auto rating brake pads for Mazda 5 already 10 brands participate!
In the auto rating tires for Subaru Outback already 50 brands participate!
For cabin filter Fram already 25 reviews.
Voted AGAINST engine oil RED LINE on the rating page
Voted AGAINST engine oil PENNZOIL on the rating page
