Brake pads Ferodo or WILWOOD
Personally, I’m a fan of Ferodo, but I typically need to get them from the UK.
The AP Racing kit was installed with a set of Ferodo DS2500s in the front and stock OEM pads installed fresh in the rear.
I did tons of research and settled on Ferodo DS3.12 (FCP4425G) in front and DS1.11 (FCP4697W) rear with Castrol SRF fluid. Stock R calipers and rotors have held up as well as any aftermarkets I read about for MUCH less $. Zero issues, and cheap.
I've had good results with Ferodo DS2500 pads. More torque than stock, dusting about the same.
I love the Ferodo DS 1.11 that I use on my M4. They're noisy and the dust is epic but they're totally fine to drive to and from the track. I've used them at a few track days at California Speedway, they're wearing really well, and I've never had even the slightest fade.
For \~$250, the Ferodo DS2500's are a great pad for dual street/spirited and light/medium track use.With any semi-metallic pad, you're going to have dust. You can't really substantially reduce dusting without going to something like ceramic pads, which then frictional force is compromised.
The heat resistance is much better than the stock pads, so it'd take a lot more to make these pads fade. They are more durable as well at least according to my experience. The only issues are that when it's cold the pads do get a little noisy and there's the increased brake dust, but I think these are non major issues and worthy of the trade off for much better and reliable braking performance.
For my 987 the pagids would squeal the most. PFC08 weren’t as bad with similar performance. If you want a hybrid street/track pad that will be pretty quiet on the street (as long as you bed properly) the Ferodo DS2500 is not bad, just be aware if you’re tracking on them at a good pace under heavy braking they can wear quickly. I ran them at the glen and was able to get maybe 3 good days out of a set.
I think my DS2500s were a good bit dustier than stock
I swapped out the rear pads on my 2017 Mk7 Golf R following the instructions for doing so with OBD Eleven Pro to a "t" and still wound up with a plethora of error codes. I installed new (Ferrodo) pads
Write your review
Help others - share your experience with this part.