Brake pads GALFER or OEM Audi
Got a 2014 DSG and find around town it’s 22-26 mpg but 35 on long motorway runs.
Galfer pads and rotors. I'm 210lb and can confidently slow down with rival flat mounts and 160mm rotors
Audi 4 piston front brakes - 26lbs lighter
People can talk all they want but I had a 2017 A4 bought at 32k miles and sold with 94k 2.5 years later in 2022 and it was by far the most reliable and hassle free car I ever had. Nothing but routine maintenance, in that period I didn’t even have to change the brakes.
Galfer pro pads are the best ones I have ever used. They have more power, maybe same amount of modulation as shimano ones, they seem to resist fade better amd have ok life span.
1st step, better pads for more initial bite and overall stopping power. Galfer HH can be had for $80 front and rear, you can spend a lot more on performance/track pads if you want the best.
Yes. I do oil, break pads and rotors all the standard stuff
Since starting my drive from NY to NJ daily, ALL my previous cars, Audi Q5 and Toyota Sienna, will start "brake and shake" or was it "shake and brake".. at about a year in at around 10k-15k miles. I am guilty of heavy braking so with it comes excess wear.
As someone who has a TTRS, the brakes blow. Heavy, overheat, poor feel, and expensive rotors/pads.
I just switched from OEM (Brembo HH Sintered, I think) pads to Galfer HH Sintered pads. I forgot to scotchbrite the discs and I think I glazed everything up during bedding-in process. I used scotchbrite like mad on the discs and sanded the pads with 220 grit until they were dull like when new, but the brakes seem to have the same behavior - heavy brakes test after 10 mile bed-in ride, the brakes plateau without getting to ABS trigger unless I squeeze like a motherfucker. The previous pads I could stand up on the front wheel with one or two fingers, so I feel like I've done something wrong.
Write your review
Help others - share your experience with this part.