Brake pads Mintex or Hawk Performance
Always had good luck in the past with Hawk HPS pads.
Brake dust difference between stock Akebono pads on the front and Hawk Performance Ceramic on the rear. The backs would usually be about 70% as dusty as the fronts and now they're essentially clean
I've been tracking my 335i for a few years now, ive used ebc yellowstuff, and bluestuff pads. But they dont even hold a candle to the hawk ht10 pads I have in my spec e46, easily my favorite part of that car.
hawk hps 5.0 pads all around
In short: support your local motor factors, and buy Mintex brakes and pads. I've a 107 and the Mintex pads/brakes have been brilliant.
I use Hawk HPS 5.0 pads. Definitely an improvement over stock and I haven’t had any issues with dust.
Depending on the track the factory pads may be adequate for your first day, but a more aggressive and higher temp pad would be my recommendation because nothing will up the "pucker factor" like your brake pedal going to the floor. A pad like the Hawk HPS 5.0 is what I'd consider to be minimally acceptable for street tires on an average track. I'm a big fan of GLOC pads and I can confirm their R8 compound on all 4 corners works great on the GTI/R/A3/S3 for street tires.
Hawk makes the DTC series for the 718 base. Can't go wrong with the DTC-30 for a pad that you can drive back and forth to the track and will perform very well on track. The dust is nasty and corrosive though, so I'd recommend cleaning the wheels and changing the pads out for street duty.
replaced calipers with OE ones again, uprated discs with mintex pads. worked hundreds for bout 500miles and now its playing up again like before.
Last year I switched to HP+s and have been unimpressed. imo they are fairly vague. I've also found the dust from the HP+s to be very corrosive.
Write your review
Help others - share your experience with this part.