Brake pads OEM Subaru or Bendix
I’m my 2019 Forester, I hit 70k miles without changing either fronts and rears. The fronts now need to be done. Hard to argue against OEM with that performance.
I put Bendix pads and rotors frt n back on mine a year ago.
Doing a good job, we tow and load up with firewood alot.
Nice even wear on everything. Smooth stops.
I was hugely disappointed, because the pads are great. TBH, it's basically a low- to mid-tier race pad, so the price is not that ridiculous. I put quite a few track days on them and after trying out some other aftermarket pads, I actually went back to the OEM pads for 3-season street use.
I replaced the front pads with some bendix 4wd pads and machined the rotors, was a noticeable improvement straight away. I also flushed the brake fluid at the same time.
I just did my Rotors and brakes on my 2nd Gen 2005 and used Bendix Rotors PRT5716 for rears and PRT5675 for front. As for pads I used their Premium Copper free CFC1100 and it major difference in stopping feels like its brand new again. Also pads I did before I hated they were Wagner Ceramic Thermo quiet pads and they squeaked non stop min put them in it drove me nuts I got money use out of them and used them till I couldn't take squeaking anymore LOL
Bendix pads are very good. I haven't tried their rotors, but I wouldn't hesitate next time I have to change out.
I had an 2017 Outback 2.5, had it since April of 2017 until last week, during that time I put on 93k km on it. I wish I had gotten the 3.6, I got the 2.5 hoping to save fuel, my average was around 25mpg for lifetime, and I drive a lot on hwy and country road, I never once was able to hit the 30mpg even if it's just me in the car and driving 50mph on the country road, this part I really feel like Subaru should correct their mpg reading, in winter it can get as bad as 18mpg in the freezing weather, as when it's cold the transmission will make the engine constantly rev at higher to warm it up, the 2.5 is also not a smooth engine when at idle, I had a vibration issue that was deemed normal. Overall, it's a reliable car, but its not a durable car, another thing is, when taking off quickly from a stop, it can really bog down, most people are used to first gear and just boot, but these CVT don't have first gear and it can be rather unexpected, I've almost got hit from behind a couple times from that. The eyesight is a good feature, the lane departure can be annoying at times but I was ok with it, these cars have an issue with windshield chipping, and if the car has eyesight, the windshield need to be a specific one and then the eyesight needs to be re-calibrated, this happened to me TWICE, and it got expensive very quick. OEM tires are lousy, by lousy I mean it doesn't even get good mpg, doesn't get good grip in ANY condition and puncture easily if you take it to any sort of gravel road, I had puncture the tire within 1200km, I just got some decent A/T tires after, no problem for the last 90k. The brakes are soft, so first thing I did was changed the pads.
I had bendix on my cars before, the gen CT and metal king has too much metal components, hence its noisy and scratches the rotors.
How were the brakes? My concern with towing is the brakes. I have not towed anything mainly for this reason. I find the brakes to be a weak point of the car and the rear pads wear out very quickly, on the 2013 version anyway. I am not a heavy footed driver, no fast starts, no slamming of brakes at lights and stop signs. Keep things nice and smooth, no riding of brakes, no fast corners which would engage the rear brakes more due to the vector control system (whatever they call it). Rear brakes wear fast and overall braking is fair. Your thoughts from a trailer perspective? Thx!!!
I bought Bendix DB2315 EURO+ for my Mercedes B180 year 2012 Petrol.
Tried to change the front brake pads and they don't fit.
Write your review
Help others - share your experience with this part.