Brake pads POWER STOP or OEM Porsche
This is the pad I'm using on track. I use Z26-1001 on street. If you search by pad on Powerstops site, it shows you all the cars that use the same pad. They don't have the Macan listed, but I can confirm they are the correct pad and you can see that almost every 4 pot Brembo OEM system uses the same pad.
For brakes, I have Power Stop on all of my cars. But I've heard nothing but good things about Akebonos too.
I have Power Stop all around on my daily driver - a Pontiac Vibe base. Z17 Ceramic pads in front, Geomet-coated rotors (note that the coating will wear off quickly where the pads contact, but it does keep the rest of the rotors from getting rusty), and OE-style semi-metallic shoes in the back. Stock calipers. Not sure how they do with more spirited driving, but I think they work very well for my daily. No noise, no noticeable dust, good braking power.
I'm REALLY picky about brakes... I've been down this road more than a few times and finally settled on Powerstop Evolution pads... they bite really well, warm or cold weather, and they don't eat the rotors alive either I think they are the best street pads I've found to date.
Powerstop Evolution from rockauto.com. As quiet and dust-free as OEM, but with a bit more stopping power. They’re also much cheaper than OEM.
The stopping power was already crazy good with just the fronts an I could feel it right away its already better, I can't wait till they are bedded in. As far as 4 piston brakes goes I think these are by far the cheapest an best option to go.
I have personally used centric rotors and powers top ceramic brakes for years with no complaints.
If you never get the brakes terribly hot (single high-energy braking events are fine, I'm talking extended periods of track or track-like driving here when I say "hot"), porsche OEM pads work great. If you do run the car under track or track-like conditions, the OEM pads never fade (in my experience), but they do wear out alarmingly fast.
I tried looking at different brands of pads for my 911. Just ended up going with OEM pads. Turns out most people think Porsche OEM is the best stuff and I've learned for many aspects of these cars that is true. This is very different from every other car I owned where you could either get better performance or reduced costs by going aftermarket. With my Porsche I couldn't find a pad that offered better daily driver + some hard driving performance... or was cheaper without sacrificing performance.
It's honestly very low maitenence, the only thing that's slightly more costly than "normal" is your oil change due to the larger volume needed for these engines. Brakes are cheap of you do them yourself, not really different than other cars though. As far as reliability is concerned, it's top-notch.
Write your review
Help others - share your experience with this part.