Oil filter Hengst or MOTUL
I like using motul with OEM filters but I doubt it's making much of a difference.
Tiguan owners, I can tell you from experience that you don't need to go under the car to install this! You have to reach for the boost sensor but everything can be done from up top!
I have several VAG cars and perform changes at 5k, Liquimoly kits from FCP Euro, always use a quality OE filter such as Hengst, save your records and any reasonable buyer will understand.
First of all, change the brand of the oil filter and do the same test again. My recommendation is Hengst filters, same quality with Mann and Bosch, made in the same factory in Slovakia.
I have had good results with the Hengst. Recently ran a Hengst to 20,000 miles. It’s was a bit crispy but was doing just fine.
If I really care about the car, I use Motul and a factory filter.
It’s easy peasy to DIY at every OCI (5k mi or 6 mos whichever comes first, 2014 Mazda6 Touring 6MT). Been doing it, for decades (various makes; at times with an oil boy vacuum fluid extractor). Will be changing mine tomorrow. This time, will try Kirkland 0W20, with a German Hengst oil filter (identical dimensions/specs Made in Japan OEM Mazda PE01-14-302) plus Lubro Moly MoS2 (molybdenum).
Oil service has been done every 5K since then using Liqui Moly Molygen Full Synthetic 5W-40 and Hengst filters.
Changed my '06 BPY oil today, noticed large copper flakes in the oil filter and at the bottom of the pan when draining oil.
I've just experienced this same problem with my 2017 Buick. I have the UFI cap and the dealers used the Hengst filter 7 of the 9 times I had it changed at the dealer. Using a Hengst filter in the UFI cap results in the oil bypassing the oil filter all the time. The UFI cap expects the bypass valve to be on the filter and the Hengst filter just has an open hole there resulting in the car being run for about 50,000 of its 70,000 mile life WITHOUT an oil filter.
Write your review
Help others - share your experience with this part.