Timing belt DAYCO or Gates
Go with Gates, it’s the OEM and you won’t find anything better than that for those parts
Thats a gates replacement,done at the required distance.,100k
That's a gates timing belt which is a high quality aftermarket belt. It is not OEM and has been replaced. It looks like it was replaced at around 100k miles which is spot on.
You could use a Gates timing belt, they're great quality.
Fitted new gates belt
Dayco, continental should be fine, as long as it’s not China Amazon stuff. Gates it usually good but as with anything these days quality control is a crap shoot.
Dayco is an OE manufacture for many manufacturers, it's a pretty solid belt. Quick answer is yes you should get it changed ASAP, I've seen a lot worse belts than this one and they drove to the dealership just fine.
Was able to get the new belt installed with a little less tension but still less than 90* of flex. It till popped a tiny bit during crank rotation, but I decided to go with it, have driven it for about an hour or so, put it through a couple heat cycles all while checking it every 15 ish minutes. First couple times I checked it, it was kinda tight, last couple times I checked it, it felt ok, so idk.
Gates timing belt broke and took out the engine in my old 2009 legacy with the sohc 2.5l. It was only installed for about 5 years and 60k mi / 96.5k km. Don't skimp on the most important belt your engine has, buy genuine subaru.
I have worked on some where the belt itself snapped in under 10-15k miles, others where the bearings fell apart in the 40-50k mile range. I no longer use them and refuse to install them on customer vehicles.
Write your review
Help others - share your experience with this part.