I began reading and ended up buying a set of NGK BKR7E-11 (Stock# 4464). From researching, it looks that the ones I got had the v-groove center and a little less projected tip. They are also 2 steps colder. It's been about 3k miles and the car is running great. Big difference over the Denso plugs as far as smoothness. I did not notice a difference in mileage.
Reviews of NGK parts For Business
Japan
I can only comment on the ZFR5E-11 ... and let me say...THEY ARE AWESOME. Now of course these are not "official" OEM spark plugs for our engine, so just remember that...but the results speak for themselves. I'll say it again for effect... THE NGK ZFR5E-11 STANDARD COPPER SPARK PLUGS RUN GREAT IN VW 2.5L INLINE-5 CYLINDER ENGINES !!!!!!! Just had to gap down to .040"/1.0mm. The butt-dyno says YES, idle is smoother, MPG's are up (couldn't get more than 28 highway before, recorded multiple highway cruises on the NGKs at 72-75mph in the 30.X range!), and, oh yeah, did I mention they cost $2.50 per plug? The wallet also says YES. So run along now to your local auto parts store, where they are literally ALWAYS in stock (part #4435) and rejoice at the thought of walking out with 5 quality NGK copper plugs for less than $13.
NGK BKR6EQUP. Those are the original and they tend to work well for the entire 100k change interval while many other brands/models can be problematic after a while.
I pulled my original plugs, and they were exactly the same as the replacement NGK. They're nice so far.
I installed the NGK PFR7S8EG laser double platinum. They came gapped at .032. Initially I installed them at .032 gap and just yesterday I closed the gap to .028. Car runs strong and idles smooth at both gaps.
I don't cheap out on the car so everything i put most by a name brand. New Parts; 37. NGK Spark Plugs
Replaced old plugs, DENSO W20EXR-U, with new NGK BPR6ES. Idles a lot more smoothly now.
I prefer NGK for both plugs and wires.
I had NGK PFR6Q and it ran fine. But... now I use the stock NGK plugs
DO NOT DO NOT DO NOT get laser series platinums! They are junk! I tried them out and our motors do not like them. I had so many issues with them I threw them away
Write your review
Help others - share your experience with this part.