The brackets I ordered from usrt bolt up to the boxster red rears.... As to whether rear boxster calipers work or not I've done and uses the calculator several times and it is a 15% increase in brake power..
Ok, so i got them fitted yesterday. I used the following: - caliper carripers from Epytec for the cayenne zr18 caliper for mk4 : http://www.epytec.de/modelle/vw/gol...achse/1293/adapter-porsche-bremssattel-audi-tt-a3-vw-golf-4-polo-9n-bora?c=1250 - braided brake hoses from Epytec for porsche calipers: http://www.epytec.de/kategorien/bre...ng-vw-golf-4-r32-audi-a3-s3-a1-porsche-brembo-ttrs-polo-9n-bremsen-umbau?c=1730 - regular ATE brake pads - EBC R32 Brake discs - Porsche Cayenne ZR18 calipers I ended up having to put my 20mm spacers from the back wheels to the front, because the 10mm ones didn't clear the caliper. The epytec hardware is really good quality stuff, comes with all necesary german TUV paperwork to be able get the brakes \"registered\". I drove a total of 10 miles, and as a first impression, the pedal is kind of spongy and goes down pretty low. I will definitely look into upgrading to a 25.4mm M/C. I will let you guys know more after the brakes get seated in properly and do a really good brake bleeding to a better brake fluid.
I'd go with Porsche calipers on stock rotors, which is what I run. MUCH improved pedal feel and modulation, ability to swap pads without taking the caliper off, and more pad options.
I've got an Audi A4 Quattro that I DD, Autocross and teach HPDE ( Track Days ). Originally I tried the TT carrier / A8 rotor (312mm ) upgrade. I later switched to Porsche Boxster calipers because I was getting pad taper on Track Days.
Rear calipers are a Porsche 944T, the disks in a VW Corrado / Golf G60, 280mm, 274mm lowered to the clamps are anchored with an adapter for Grinling54, is to lower a bit with the grinder, but it is simple
I currently have 12.3" Audi TT rotors with Porsche 911 (996) calipers. Those brakes works fine, but I want smaller brakes so I can fit 15" wheels.
I run TT rotors with Boxster calipers. I like this setup very much. Brake pedal is a little firmer than stock and they are easy to modulate on the street.
First day with my 951 on the road, just got it registered and my front drivers caliper locks up and boiled my fluid before I could get home.
ok so last weekend i did 312mm rotors, porsche boxster calipers and stainless lines. i had g60 brakes previous. i bled them out nooooooo air. drove the car and expected to stand it on it nose. brakes no better than what i had, maybe worse.
Write your review
Help others - share your experience with this part.
Brake caliper Brembo or Girling
Brake caliper Girling or OEM Volkswagen
Brake caliper Brembo or OEM Volkswagen
Brake caliper Girling or POWER STOP
Brake caliper Girling or OEM Porsche
Brake caliper Brembo or POWER STOP
Brake caliper Brembo or OEM Porsche
Brake caliper WILWOOD or Girling
Show allVoted AGAINST engine oil RAVENOL on the rating page
The brake discs FEBI got the first review!
The brake caliper OEM BMW got the first review!
The timing chain OEM Porsche got the first review!
For cabin filter Fram already 25 reviews.
For tires GISLAVED already 25 reviews.
In the rating best ignition coil already 13 brands participate!
In the rating best windshield already 14 brands participate!
In the rating best starter motor already 10 brands participate!
In the auto rating brake discs for Volkswagen Golf already 10 brands participate!
In the auto rating headlights for Volkswagen Golf already 5 brands participate!
In the auto rating tires for Toyota Corolla already 50 brands participate!
For oil additives LIQUI MOLY already 25 reviews.
Voted AGAINST engine oil RED LINE on the rating page
Voted AGAINST engine oil PENNZOIL on the rating page
