Went with Brembo UV coated rotors so they won't get rusty. Then, for pads, I went with EBC Reds on the front and Wagner ceramic on the rears. Stopping power is just like OEM pads without the awful awful awful brown brake dust. Night and day difference with the brake dust. Wheels look great for a longer time.
Verstappen was **very satisfied with the material** provided by the Bergamo and Italian brand in the first seasonal events, as well as the team.
In July 2018, at ~124,000 miles, I put new PowerStop Geomet coated front rotors and new front PowerStop ceramic pads and rotors on a 2011 Honda Odyessy, for an owner who was about to move to into the rust belt (they were worried about rust so wanted coated rotors). OE rotors were warped and had very bad vibration at all speeds when braking. As it happens, the owner moved back to my area in 2023 and the car came back for routine service at ~178,000 miles. Pads about ~40% through, coated rotors showing no signs of rust, and despite the same person (his wife) driving the car with the same behaviors that apparently warped the OE rotors in the ~50k miles from when they first bought the car, 50k miles later and no signs of uneven rotor wear or warping. The PowerStop Evolution ceramic products have been great from my experience. The important thing with new pads and rotors is to follow the bed in procedure once they are installed.
I went with Brembo rotors and Powerstop pads. So far so good.
You need at least a high carbon vented disc like Brembo if using ceramic pads
Of course Brembo is reliable.
Use the Powerstop kit. I have them on 3 personal cars (all around) right now and hundreds of customer cars. Not one comeback or complaint. Metallurgy on rotors is good as long as you do a nice break in period and burnish pads to rotors.
I got a set of G63 Brembo rotors at Autozone for 10% of dealer list.
on my SELP with 18K miles, the rear rotors were pulsating and shuddering at high speeds and I know exactly what caused it, coming over a mountain pass, but NOT riding the brakes. Anyway, the disc surafces looked ok but 2/3 of the pads had gone. Changed out with Pagid pads and Brembo rotors - we\u2019ll see how that goes. BTW removing the caliper is a PITA the triplle hex bolts were are very very tight. On my SE with 38k miles front pads were down to last remaining 1mm\u2026. Yeah I should have checked them a while back. Both front rotors on both cars are heavily grooved, but no signs of deposits. Put Pagid pads in the fronts. On the SE I have just ordered Brembo cross drilled rotors for the rear. I thought I would just share this info and given more evidence of how these Arteon\u2019s eat pads and rotors wear wise and are easy to distort.
Had them on a Mazda3. Developed pulsation within 3 months.
Write your review
Help others - share your experience with this part.
Brake discs Zimmermann or POWER STOP
Brake discs Brembo or Zimmermann
Brake discs Zimmermann or Centric
Brake discs Zimmermann or STOPTECH
Brake discs Zimmermann or OEM Volkswagen
Brake discs Zimmermann or EBC
Brake discs Zimmermann or Raybestos
Brake discs Zimmermann or R1 Concepts
Show allVoted AGAINST engine oil RAVENOL on the rating page
The brake caliper FEBI got the first review!
The drive shaft OEM BMW got the first review!
The brake cylinder Metelli got the first review!
For tires OEM Toyota already 25 reviews.
For brake caliper OEM Volkswagen already 25 reviews.
In the rating best fuel pump already 5 brands participate!
In the rating best head gasket already 3 brands participate!
In the rating best antifreeze already 9 brands participate!
In the auto rating brake discs for Volkswagen Golf already 10 brands participate!
In the auto rating oil filter for Volkswagen Passat already 5 brands participate!
In the auto rating brake pads for BMW M2 already 5 brands participate!
For wiper blades PIAA already 100 reviews.
Voted AGAINST engine oil RED LINE on the rating page
Voted AGAINST engine oil PENNZOIL on the rating page
