EBC rotors are fine. DBA rotors are generally excellent but a bit pricey. DBA T2 slotted are great if they have a size for your model/application. StopTech/Centric are good.
Just got DBA rotors and HPS 5.0 pads with Stoptech lines and Motul RBF600 fluid. Amazing upgrade. Rotors are a preference most top tier brands are the same. If you want street pads the 5.0 are the best
Just the bigger carrier with the bigger rotors on the front. Didn't bother with bigger for the rears. I bought Red Stuff pads.
That being said, it would be great to see a basic writeup with pics of the fronts and rears being changed. I ordered and received some new slotted/drilled rotors with ceramic pads. When ordering, I just used the GTI as the model, since it uses the same brake rotors as the TDI, 312mm F, 272mm R - IIRC. If I have time, I will get some pics and write a rudimentary writeup on it. Not sure if I have time/patience to tackle this myself so I may just have my Audi/VW guy do the work (he has many more tools and 2 lifts). In any case, I will try to get some info and pics in here.
Just discussed this last week. I side with my VW dealer on it. They recommend just replacing the rotors, its really not that much more than having them turned, considering you almost guarantee no pulsation, no shimmy or shudder and more even brake wear.
Engine braking is how I got 60k miles out of the original brake rotors and pads on my '07 GTI as well as a steady 30 mpg while barely trying.
I'm putting [DBA T3 4000](http://www.amazon.com/gp/product/B005SJ7ERU/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1) rotors on my WRX (with Ferodo DS2500 pads) next week. Those rotors are rated for racing temps and aren't crazy expensive.
I am happy with the R32 setup so far ( rotors are freaking heavy); but if I was to upgrade it would be either AP or stoptech trophies....
The rear brakes will be an absolute nightmare. There is not a lot of room. As far as I am aware, MK6/MKV R/R32 brakes are the same, so... prepare yourself for a miserable time doing the rear rotors. The rear pads are fine. The rotors suck ass.
Unfortunately the problem is inherent in the design of the rotors. Not in where they were produced. You can put the best rotors in the world on that car and they will still warp. Vw/Chrysler would need to spec a larger and thicker rotor to help dissipate heat properly. All aftermarkets will make the rotor to fit, based on the crappy oem specs. So, get used to having new rotors put on...because recall or not, Chrysler still needs to redesign that rotor. FYI, I'm in the same boat as you guys! These rotors suck!
Write your review
Help others - share your experience with this part.
Brake discs Zimmermann or POWER STOP
Brake discs Brembo or Zimmermann
Brake discs Brembo or POWER STOP
Brake discs Zimmermann or Centric
Brake discs Zimmermann or STOPTECH
Brake discs Zimmermann or OEM Volkswagen
Brake discs Zimmermann or EBC
Brake discs Zimmermann or Raybestos
Show allVoted AGAINST engine oil RAVENOL on the rating page
The brake pads OEM Alfa Romeo got the first review!
The tires OEM Fiat got the first review!
The ABS unit OEM FORD got the first review!
For oil additives LIQUI MOLY already 25 reviews.
For tires GISLAVED already 25 reviews.
In the rating best cabin filter already 13 brands participate!
In the rating best shock absorbers already 13 brands participate!
In the rating best fuel pump already 5 brands participate!
In the auto rating shock absorbers for Ford Ranger already 20 brands participate!
In the auto rating headlights for Volkswagen Golf already 5 brands participate!
In the auto rating tires for Toyota Corolla already 50 brands participate!
For cabin filter Fram already 25 reviews.
Voted AGAINST engine oil RED LINE on the rating page
Voted AGAINST engine oil PENNZOIL on the rating page
